MS JN/HBW555XCr21 Hierros fundidos
Actualizaciones de datos
Este material cuenta con 308 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
MS JN/HBW555XCr21 Composición química
MS ISO 21988: 2007 / Hierro fundido resistente a la abrasión - clasificación
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
MS JN/HBW555XCr21 Tratamiento Térmico
- Typical heat treatments are hardening, tempering, soft annealing and annealing.
A typical hardening cycle is: slowly heating up to a temperature within the range of 900°C to 1050°C, holding for a determined period of time and then rapidly cooling.
A typical tempering cycle involves: slowly heating up to a temperature within the range of 200°C to 550°C, holding for a period of time appropriate to the thickness, followed by air or furnace cooling.
If casting hardness below HBW 378 is required (e.g. to facilitate machining), soft annealing can be carried out. An example of a soft annealing method is: slowly heating up to a temperature within the range of 920°C to 975°C, holding for at least 1 h, then slowly cooling down in the furnace to about 810°C and then further cooling down to 600 °C at a rate not exceeding 55 K/h, followed by air or furnace cooling.
If castings require annealing then a typical annealing involves slowly heating up to a temperature of 700 °C to 750 °C for a minimum of 4 h, and then slowly cooling in the furnace to 600 °C, following by air or furnace cooling.
MS JN/HBW555XCr21 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
MS JN/HBW555XCr21 Materiales equivalentes internacionales
Mostrando 15 de 213 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 213 equivalentes internacionales?
Consulte los 213 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 213Referencias cruzadas
- 9Composición
- 1Propiedades mecánicas
- -Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 84Proveedores Totales