MS SWRCH16K Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 59 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
MS SWRCH16K Composición química
MS 1795: 2005 / Aceros para recalcado en frío y extrusión en frío - Especificaciones
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
MS SWRCH16K Propiedades físicas
Temperatura
Este material cuenta con 59 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
MS SWRCH16K Tratamiento Térmico
- Carburizing: 880-980°C; Direct and simple hardening: 830-870°C; Double hardening - Core hardening: 880-920°C, Case hardening: 780-820°C; Tempering: 150-200°C; The temperatures given for carburizing, direct and simple hardening, core hardening, case hardening and tempering are for guidance only. The actual temperatures chosen should be those that will give the properties required; The carburizing temperature will depend on the chemical composition of the steel, the mass of the product, and the carburizing medium. In general, if the steels are direct hardened, a temperature of 950°C is not exceeded. Also, for special procedures e.g. under vacuum, higher temperatures, e.g. 1020-1050°C, are not unusual; If the steels are direct hardened and if there is a danger of distortion, they should be quenched from a temperature between the core-hardening and case-hardening temperatures; Time for tempering, as a guide: 1h minimum.
MS SWRCH16K Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
MS SWRCH16K Materiales Internacionales Equivalentes
Mostrando 15 de 34 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 34 internacionales equivalentes?
Consulte los grados 34 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 34Referencias cruzadas
- 5Composición
- 16Propiedades mecánicas
- 3Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- -Proveedores Totales