MS X11CrNiMnN19-8-6 Aceros inoxidables
Actualizaciones de datos
Este material cuenta con 166 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
MS X11CrNiMnN19-8-6 Composición química
MS 2317: 2010 / Aceros inoxidables - Composición química
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
MS X11CrNiMnN19-8-6 Propiedades físicas
Temperatura
Este material cuenta con 166 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
MS X11CrNiMnN19-8-6 Tratamiento Térmico
- Hot forming (air cooling): 1150-850°C; Solution annealing (water or rapid cooling with air): 1000-1100°C. If heat treatment is carried out in continuous furnace, the upper part of the range specified is usually preferred, or even exceeded. The lower end of the range specified for solution annealing should be aimed at for heat treatment that is part of further processing, otherwise the mechanical properties might be affected. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 980°C is adequate as a lower limit for Mo-free steels, a temperature of 1 000°C for steels with Mo contents up to 3% and a temperature of 1 020°C for steels with Mo contents exceeding 3%.
- Hot forming (air cooling): 1150-850°C; Solution annealing (water or rapid cooling with air): 1000-1100°C.The lower end of the range specified for solution annealing should be aimed at for heat treatment as part of further processing, because otherwise the mechanical properties might be affected. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 980°C is adequate as a lower limit for Mo-free steels; a temperature of 1 000°C for steels with Mo contents up to 3%; a temperature of 1 020°C for steels with Mo contents exceeding 3%.
MS X11CrNiMnN19-8-6 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
MS X11CrNiMnN19-8-6 Materiales Internacionales Equivalentes
Mostrando 15 de 53 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 53 internacionales equivalentes?
Consulte los grados 53 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 53Referencias cruzadas
- 32Composición
- 32Propiedades mecánicas
- 4Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- 1Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 42Proveedores Totales