PROPRIETARY CPM 154 Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 25 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CPM 154 Composición química
Crucible Industries LLC., Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CPM 154 Propiedades físicas
Temperatura
Este material cuenta con 25 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CPM 154 Tratamiento Térmico
- Annealing: Heat to 900°C, hold 2 hrs., slow cool no faster than 15°C per hour to 650°C, then furnace cool or cool in still air to room temperature. It can be cycle annealed by heating to 900°C. hold 2 hours, cool to 704°C, hold 4 hours, then air cool. Stress Relieved: Annealed Parts: Heat to 595-705°C, hold 2 hours, then furnace cool or cool in still air; Hardened Parts: Heat to 15-30°C below the original tempered temperature, hold 2 hours, then furnace cool or cool in still air. Hardened: Preheat: Heat to 760°C Equalize; Austenitize: 1037-1093°C, hold time at temperature 30-60 minutes; Quench: Oil or positive pressure (4 bar minimum) to below 50°C, or salt quench to about 540°C, then air cool to below 50°C. Salt bath treatment, if practical, will ensure the maximum attainable toughness for a given hardened treatment; Temper: Twice at 204-650°C, 2 hours minimum each time.
PROPRIETARY CPM 154 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CPM 154 Materiales Internacionales Equivalentes
Mostrando 2 de 2 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 2 internacionales equivalentes?
Consulte los grados 2 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 2Referencias cruzadas
- 3Composición
- 6Propiedades mecánicas
- 10Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 3Proveedores Totales