ASME SA-645 Grade A Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 137 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASME SA-645 Grade A Composición química
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 2025
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
ASME SA-645 Grade A Propiedades físicas
Temperatura
Este material cuenta con 137 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
ASME SA-645 Grade A Tratamiento Térmico
- Hardening - The plates shall be heated to a temperature within the range from 855 to 915°C (1575 to 1675°F), held within that temperature range for a minimum of 2.4 min/mm of thickness, but in no case less than 15 min, and then water-quenched to below 150°C (300°F).
Intermediate Heat Treatment - The plates shall be reheated to a temperature within the range from 690 to 760°C (1275 to 1400°F), held within that temperature range for a minimum of 2.4 min/mm of thickness, but in no case less than 15 min, and then water-quenched to below 150°C (300°F).
Tempering - The plates shall be reheated to a temperature within the range from 620 to 665°C (1150 to 1225°F), held within that temperature range for a minimum of 2.4 min/mm of thickness, but in no case less than 15 min, and then water-quenched or air cooled to below 150°C (300°F).
ASME SA-645 Grade A Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
ASME SA-645 Grade A Materiales Internacionales Equivalentes
Mostrando 2 de 2 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 2 internacionales equivalentes?
Consulte los grados 2 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 2Referencias cruzadas
- 9Composición
- 17Propiedades mecánicas
- 61Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- 12Bicho raro
- -Uniones
- -Revestimientos
- 34Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 1Proveedores Totales