PROPRIETARY Uddeholm Orvar 2 Microdized Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 75 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Uddeholm Orvar 2 Microdized Composición química
Uddeholms AB, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Uddeholm Orvar 2 Microdized Propiedades físicas
Temperatura
Este material cuenta con 75 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Uddeholm Orvar 2 Microdized Tratamiento Térmico
- Soft annealing: Protect the steel and heat through to 850°C (1562°F). Then cool in the furnace at 10°C (18°F) per hour to 650°C (1202°F), then freely in air;
Stress relieving: After rough machining the tool should be heated through to 650°C (1202°F), holding time 2 hours. Cool slowly to 500°C (932°F), then freely in air;
Hardening: Pre-heating temperature: 600-850°C (1112-1562°F), normally in two pre-heating steps. Austenitizing temperature: 1020-1050°C (1868-1922°F), normally 1020-1030°C (1868-1886°F);
Quenching media: High speed gas/circulating atmosphere, Vacuum (high speed gas with sufficient positive pressure). An interrupted quench is recommended where distortion control and quench cracking are a concern, Martempering bath or fluidized bed at 450-550°C (842-1022°F), then cool in air, Martempering bath or fluidized bed at 180-220°C (356-428°F) then cool in air, Warm oil;
Tempering: Choose the tempering temperature according to the hardness required by reference to the tempering graph. Temper minimum twice with intermediate cooling to room temperature. Lowest tempering temperature 250°C (482°F). Holding time at temperature minimum 2 h.
Nitriding and Nitrocarburizing:
Gas nitriding at 510°C for 10 h and 0.12 mm depth or 30 h for 0.20 mm depth.
Plasma nitriding at 480°C for 10 h and 0.12 mm depth or 30 h for 0.18 mm depth.
Nitrocarburizing in gas at 580°C for 2.5 h and 0.11 mm depth or in salt bath at 580°C for 1 h and 0.06 mm depth. - Austenitizing temperature 1020°C (1870°F). Holding time 30 min
PROPRIETARY Uddeholm Orvar 2 Microdized Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Uddeholm Orvar 2 Microdized Materiales Internacionales Equivalentes
Mostrando 2 de 19 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 19 internacionales equivalentes?
Consulte los grados 19 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 19Referencias cruzadas
- 6Composición
- 26Propiedades mecánicas
- 14Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- 2Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 6Proveedores Totales