PROPRIETARY EskyLos 2343 Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 201 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY EskyLos 2343 Composición química
Lucchini RS, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY EskyLos 2343 Propiedades físicas
Temperatura
Este material cuenta con 201 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY EskyLos 2343 Tratamiento Térmico
- Supplied in the annealed condition with hardness lower than 220 HB.
Soft annealing: at 850°C, heating max 50°C/h, soaking time minimum 120 min from when the temperature settles, cooling slow in the furnace.
Stress relieving at 650°C, heating max 100°C/h, soaking time minimum 120 min from when the temperature settles, cooling slow in the furnace. If the suggested temperature is lower than the tempering temperature, the stress relieving temperature will be 50°C lower than the tempering temperature previously applied.
Hardening: first pre-heating at 400°C, heating max 150°C/h, soaking time 60 min every 25 mm thickness or when (Ts-Tc)<90°C; second preheating at 600°C, heating max 150°C/h, soaking time 45 min every 25 mm thickness or or when (Ts-Tc)<90°C; third preheating at 800°C, heating max 150°C/h, soaking time 25 min every 25 mm thickness or when (Ts-Tc)<90°C;
Austenising at 980°C, heating >150°C/h, soaking time (x+39)/2 or 30 min from when (Ts-Tc)<15°C, cooling air, vacuum cooling, salt bath, oil. Tempering: the first temper at 580 °C, soaking time 0,8x+120, cooling at room temperature; the t of the second temper must be set on the basis of the required mechanical properties, and must be higher than the t applied for the first temper, soaking time 0,8x+120, cooling at room temperature; A third temper at a temperature of 30-50°C below the maximum temperature previously applied, soaking time 0,8x+180, slow cooling in the furnace up to 250°C, then at room temperature.
PROPRIETARY EskyLos 2343 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY EskyLos 2343 Materiales equivalentes internacionales
Mostrando 15 de 87 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 87 equivalentes internacionales?
Consulte los 87 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 87Referencias cruzadas
- 6Composición
- 10Propiedades mecánicas
- 11Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- 2Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 84Proveedores Totales