PROPRIETARY Uddeholm Corrax Aceros inoxidables
Actualizaciones de datos
Este material cuenta con 39 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Uddeholm Corrax Composición química
Uddeholms AB, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Uddeholm Corrax Propiedades físicas
Temperatura
Este material cuenta con 39 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Uddeholm Corrax Tratamiento Térmico
- It is delivered in solution treated condition and can be used in the as-delivered condition. When, however, the steel is to be heat treated to a higher hardness, the following instructions may be helpful.
Stress relieving: It can not be performed as for other steel grades since an increase in temperature results in a higher hardness because of ageing effect;
Ageing: Higher hardness is obtained by ageing. When the ageing time is reached, cool the tool in air to room temperature. Ageing at high temperature gives a better toughness compared with ageing to the same hardness at a lower temperature. (Ageing recommendation: At 525°C/4 h - 49–52 HRC, at 575°C/4 h - 44–47 HRC, at 600°C/4 h - 40–43 HRC; Ageing 49–52 HRC is only recommended when toughness is not important.) If the material used at temperatures higher than 200°C the solution treated condition (delivery condition) is not recommended because ageing can occur during use;
Solution treatment: It is possible to solution treat material, if aged, in order to get back to the delivery condition. Solution treatment should be done at 850°C (1560°F), holding time 30 minutes. Cool in air.
PROPRIETARY Uddeholm Corrax Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Uddeholm Corrax Materiales Internacionales Equivalentes
Mostrando 1 de 1 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 1 internacionales equivalentes?
Consulte los grados 1 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 1Referencias cruzadas
- 7Composición
- 12Propiedades mecánicas
- 11Propiedades físicas
- 2Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 6Proveedores Totales