UNI 16MnCr5 Aceros estructurales y de construcción
Actualizaciones de datos
Este material cuenta con 804 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
UNI 16MnCr5 Composición química
UNI 7846: 1978 / Productos acabados en barras y rollos de acero aleado con endurecimiento especial o no aleado laminado en caliente. Calidad, requisitos y pruebas
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
UNI 16MnCr5 Propiedades físicas
Temperatura
Este material cuenta con 804 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
UNI 16MnCr5 Tratamiento Térmico
- End quench test austenitizing at 900 ± 5°C (Time for austenitizing as a guide: 30 min minimum);
Carburizing at 880-980°C (The carburizing temperature depends on the chemical composition of the steel, the mass of the product and the carburizing medium. If the steels are direct hardened, in general, a temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures (for example 1020-1050°C) are not unusual);
Direct and simple hardening at 820-860°C (The kind of quenching agent depends on, for example the shape of the products, the cooling conditions and the amount of furnace filling. If the steels are direct hardened and if there is a danger of distortion, they should be quenched from a temperature between the core-hardening and case-hardening temperatures);
Double hardening: Core-hardening at 860-900°C and Case-hardening at 780-820°C;
Tempering at 150-200°C (Time for tempering as a guide: 1h minimum). - End quench test: Quench from 880°C. Carburizing: 880 to 980°C; NOTE: If steels are direct hardened, in general, a carburizing temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures (for example 1020 to 1050°C) are not unusual. Core hardening: 840 to 880°C; Case hardening: 780°C to 820°C; Tempering: 150 to 200°C (as a guide, for 1 hour minimum).
UNI 16MnCr5 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
UNI 16MnCr5 Materiales equivalentes internacionales
Mostrando 15 de 269 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 269 equivalentes internacionales?
Consulte los 269 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 269Referencias cruzadas
- 76Composición
- 120Propiedades mecánicas
- 3Propiedades físicas
- 21Tratamiento térmico
- 3Metalografía
- -Maquinabilidad
- 37Esfuerzo-Deformación
- 37Conformabilidad
- 5Fatiga
- -Fractura
- -Bicho raro
- 9Uniones
- -Revestimientos
- 8Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 216Proveedores Totales