MSZ
Standard · Hungary · 992 references
| Standard number | Materials | |
|---|---|---|
| MSZ 113 MSZ 113 (Unalloyed steels for rivets) | 1 | chevron_right |
| MSZ 13722-1 MSZ 13722-1 (Iron-nickel alloys with controlled thermal expansion properties. Grades) | 5 | chevron_right |
| MSZ 13723-1 MSZ 13723-1 (Alloys for glass-to-metal or ceramics-to-metal seals. Grades) | 1 | chevron_right |
| MSZ 13724-1 MSZ 13724-1 (Vacuumtechnical steel. Strips) | 1 | chevron_right |
| MSZ 13725 MSZ 13725 (Soft magnetic strips of nickel-iron alloys) | 4 | chevron_right |
| MSZ 17 MSZ 17 (Seamless tubes from unalloyed steels with increased quality requirements) | 6 | chevron_right |
| MSZ 1741 MSZ 1741 (Steels for boilers and pressure vessels) | 16 | chevron_right |
| MSZ 1745 MSZ 1745 (Steels for bolts and nuts for use at elevated temperatures) | 4 | chevron_right |
| MSZ 1749 MSZ 1749 (Steel casting for use at elevated temperatures) | 6 | chevron_right |
| MSZ 17779 MSZ 17779 (Nitriding steels) | 3 | chevron_right |
| MSZ 17789 MSZ 17789 (Chromium steel for roller bearings) | 2 | chevron_right |
| MSZ 21053 MSZ 21053 (Stainless steel castings) | 15 | chevron_right |
| MSZ 2295 MSZ 2295 (Hidrogen-pressure resisting steel) | 7 | chevron_right |
| MSZ 23 MSZ 23 (Steel sheets and strips) | 5 | chevron_right |
| MSZ 2570 MSZ 2570 (Vignole railway rails. Grades and general technical requirements) | 2 | chevron_right |
| MSZ 2666 MSZ 2666 (Hot-rolled spring steels) | 10 | chevron_right |
| MSZ 2679 MSZ 2679 (Aluminium alloys for castings and ingots) | 3 | chevron_right |
| MSZ 273 MSZ 273 (Zinc-coated steel wire for power conductors) | 1 | chevron_right |
| MSZ 2751 MSZ 2751 (Railway rolling stock material. Axles for tractive and trailing stock) | 4 | chevron_right |
| MSZ 2752 MSZ 2752 (Semi-finished tyre for railway vehicles) | 7 | chevron_right |
| MSZ 2754 MSZ 2754 (Rolled or forged wheel centres for tyred wheels for tractive and trailing stock) | 4 | chevron_right |
| MSZ 29 MSZ 29 (Seamless tubes from unalloyed steels for general purposes) | 6 | chevron_right |
| MSZ 2978-2 MSZ 2978-2 (Cold drawn or cold rolled welded precision steel tubes. Technical specification) | 1 | chevron_right |
| MSZ 31 MSZ 31 (Steels for case hardening) | 19 | chevron_right |
| MSZ 3156 MSZ 3156 (Drill pipes) | 2 | chevron_right |
| MSZ 339 MSZ 339 (Hot rolled steel for the reinforcement of concrete) | 7 | chevron_right |
| MSZ 3713 MSZ 3713 (Aluminium alloys for castings and ingots) | 20 | chevron_right |
| MSZ 3714-1 MSZ 3714-1 (Wrought alloys) | 26 | chevron_right |
| MSZ 3741 MSZ 3741 (Spiral weld steel pipes with high quality requirements) | 1 | chevron_right |
| MSZ 3747-1 MSZ 3747-1 (High purity, and technically pure) | 8 | chevron_right |
| MSZ 3770 MSZ 3770 (Spiral weld steel pipes with special quality requirements) | 4 | chevron_right |
| MSZ 382-2 MSZ 382-2 (Calibrated longitudinal welded steel tubes. Technical specification) | 2 | chevron_right |
| MSZ 4051 MSZ 4051 (Seamless steel tubes with special quality requirements) | 10 | chevron_right |
| MSZ 4213 MSZ 4213 (Cold-reduced low-carbon steel strips) | 4 | chevron_right |
| MSZ 4261 MSZ 4261 (Aluminium alloys for welding wire and rod) | 11 | chevron_right |
| MSZ 4339 MSZ 4339 (Free-cutting steels) | 10 | chevron_right |
| MSZ 4351 MSZ 4351 (High-speed steels) | 8 | chevron_right |
| MSZ 4352 MSZ 4352 (Alloyed tool steels) | 14 | chevron_right |
| MSZ 4354 MSZ 4354 (Unalloyed tool steel) | 16 | chevron_right |
| MSZ 4357 MSZ 4357 (Heat resisting steel casting) | 10 | chevron_right |
| MSZ 4359 MSZ 4359 (Heat resisting steel) | 13 | chevron_right |
| MSZ 4360 MSZ 4360 (Stainless steel) | 48 | chevron_right |
| MSZ 4400 MSZ 4400 (Cold-tuogh steel) | 7 | chevron_right |
| MSZ 4747 MSZ 4747 (Steel tubes for elevated temperatures) | 6 | chevron_right |
| MSZ 500 MSZ 500 (Carbon steel general structural purposes) | 16 | chevron_right |
| MSZ 520 MSZ 520 (Wear resistant steel with high manganese content) | 1 | chevron_right |
| MSZ 5736 MSZ 5736 (Unalloyed steel wire rod) | 2 | chevron_right |
| MSZ 5750 MSZ 5750 (Crane rail) | 1 | chevron_right |
| MSZ 5776 MSZ 5776 (Valve steels for internal combustion engines) | 11 | chevron_right |
| MSZ 61 MSZ 61 (Heat-treatable steels) | 42 | chevron_right |
| MSZ 6251 MSZ 6251 (Steels for cold heading and cold extruding) | 19 | chevron_right |
| MSZ 6259 MSZ 6259 (Weather resisting low alloy steels) | 9 | chevron_right |
| MSZ 6280 MSZ 6280 (Structural steels for welding purposes) | 16 | chevron_right |
| MSZ 6447 MSZ 6447 (Welding materials for submerged arc welding of carbon steels and low alloy steels) | 12 | chevron_right |
| MSZ 6448 MSZ 6448 (Carbon steel filler metal for gas shielded arc welding) | 4 | chevron_right |
| MSZ 7262 MSZ 7262 (Cold-formed steel sections. General technical requirements and tolerances) | 4 | chevron_right |
| MSZ 8267 MSZ 8267 (Steel castings for low temperature service) | 3 | chevron_right |
| MSZ 8272 MSZ 8272 (Low alloyed steel castings) | 8 | chevron_right |
| MSZ 8273 MSZ 8273 (Abrasion resisting alloyed cast iron) | 18 | chevron_right |
| MSZ 8276 MSZ 8276 (Unalloyed steel castings) | 15 | chevron_right |
| MSZ 8625 MSZ 8625 (Technically pure iron) | 1 | chevron_right |
| MSZ 8628 MSZ 8628 (Soft magnetic low carbon steel strip and rod) | 4 | chevron_right |
| MSZ 982 MSZ 982 (Cold worked steel wire for the reinforcement of concrete) | 2 | chevron_right |
| MSZ CEN/TS 13388 MSZ CEN/TS 13388 (Copper and copper alloys - Compendium of compositions and products) | 802 | chevron_right |
| MSZ EN 10001 MSZ EN 10001 (Definition and classification of pig-irons) | 13 | chevron_right |
| MSZ EN 10016-2 MSZ EN 10016-2 (Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod) | 60 | chevron_right |
| MSZ EN 10016-3 MSZ EN 10016-3 (Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod) | 6 | chevron_right |
| MSZ EN 10016-4 MSZ EN 10016-4 (Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications) | 68 | chevron_right |
| MSZ EN 10025 MSZ EN 10025 (Hot rolled products of non-alloy structural steels; technical delivery conditions) | 60 | chevron_right |
| MSZ EN 10025-2 MSZ EN 10025-2 (Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels) | 58 | chevron_right |
| MSZ EN 10025-3 MSZ EN 10025-3 (Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels) | 16 | chevron_right |
| MSZ EN 10025-4 MSZ EN 10025-4 (Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels) | 20 | chevron_right |
| MSZ EN 10025-5 MSZ EN 10025-5 (Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance) | 38 | chevron_right |
| MSZ EN 10025-6 MSZ EN 10025-6 (Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition) | 41 | chevron_right |
| MSZ EN 10028-2 MSZ EN 10028-2 (Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties) | 34 | chevron_right |
| MSZ EN 10028-3 MSZ EN 10028-3 (Flat products made of steels for pressure purposes - Part 3: weldable fine grain steels, normalized) | 30 | chevron_right |
| MSZ EN 10028-4 MSZ EN 10028-4 (Flat products made of steels for pressure purposes - Part 4: nickel alloy steels with specified low temperature properties) | 15 | chevron_right |
| MSZ EN 10028-5 MSZ EN 10028-5 (Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled) | 18 | chevron_right |
| MSZ EN 10028-6 MSZ EN 10028-6 (Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered) | 32 | chevron_right |
| MSZ EN 10028-7 MSZ EN 10028-7 (Flat products made of steels for pressure purposes - Part 7: Stainless steels) | 128 | chevron_right |
| MSZ EN 10083-1 MSZ EN 10083-1 (Quenched and tempered steels - Part 1: Technical delivery conditions for special steels (includes amendment A1:1996)) | 100 | chevron_right |
| MSZ EN 10083-2 MSZ EN 10083-2 (Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels) | 57 | chevron_right |
| MSZ EN 10083-3 MSZ EN 10083-3 (Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels) | 56 | chevron_right |
| MSZ EN 10084 MSZ EN 10084 (Case hardening steels - Technical delivery conditions) | 72 | chevron_right |
| MSZ EN 10085 MSZ EN 10085 (Nitriding steels - Technical delivery conditions) | 18 | chevron_right |
| MSZ EN 10087 MSZ EN 10087 (Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods) | 34 | chevron_right |
| MSZ EN 10088-1 MSZ EN 10088-1 (Stainless steels - Part 1: List of stainless steels) | 433 | chevron_right |
| MSZ EN 10088-2 MSZ EN 10088-2 (Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes) | 215 | chevron_right |
| MSZ EN 10088-3 MSZ EN 10088-3 (Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes) | 227 | chevron_right |
| MSZ EN 10088-4 MSZ EN 10088-4 (Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes) | 86 | chevron_right |
| MSZ EN 10088-5 MSZ EN 10088-5 (Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes) | 84 | chevron_right |
| MSZ EN 10089 MSZ EN 10089 (Hot-rolled steels for quenched and tempered springs - Technical delivery conditions) | 38 | chevron_right |
| MSZ EN 10090 MSZ EN 10090 (Valve steels and alloys for internal combustion engines) | 20 | chevron_right |
| MSZ EN 10095 MSZ EN 10095 (Heat resisting steels and nickel alloys) | 53 | chevron_right |
| MSZ EN 10106 MSZ EN 10106 (Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state) | 70 | chevron_right |
| MSZ EN 10107 MSZ EN 10107 (Grain-oriented electrical steel sheet and strip delivered in the fully processed state) | 98 | chevron_right |
| MSZ EN 10111 MSZ EN 10111 (Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions) | 8 | chevron_right |
| MSZ EN 10113-2 MSZ EN 10113-2 (Hot-rolled products in weldable fine grain structural steels - Part 2: delivery conditions for normalized rolled steels) | 16 | chevron_right |
| MSZ EN 10113-3 MSZ EN 10113-3 (Hot-rolled products in weldable fine grain structural steels - Part 3: delivery conditions for thermomechanically rolled steels) | 16 | chevron_right |
| MSZ EN 10120 MSZ EN 10120 (Steel sheet and strip for welded gas cylinders) | 10 | chevron_right |
| MSZ EN 10126 MSZ EN 10126 (Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state) | 12 | chevron_right |
| MSZ EN 10130 MSZ EN 10130 (Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions) | 17 | chevron_right |
| MSZ EN 10132 MSZ EN 10132 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions) | 74 | chevron_right |
| MSZ EN 10132-2 MSZ EN 10132-2 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2: Case hardening steels) | 8 | chevron_right |
| MSZ EN 10132-3 MSZ EN 10132-3 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering) | 24 | chevron_right |
| MSZ EN 10132-4 MSZ EN 10132-4 (Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 4: Spring steels and other applications) | 30 | chevron_right |
| MSZ EN 10137-2 MSZ EN 10137-2 (Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels) | 40 | chevron_right |
| MSZ EN 10137-3 MSZ EN 10137-3 (Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels) | 16 | chevron_right |
| MSZ EN 10139 MSZ EN 10139 (Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions) | 12 | chevron_right |
| MSZ EN 10142 MSZ EN 10142 (Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming - Technical delivery conditions) | 38 | chevron_right |
| MSZ EN 10147 MSZ EN 10147 (Continuously hot-dip zinc coated structural steels strip and sheet - Technical delivery conditions) | 46 | chevron_right |
| MSZ EN 10149-2 MSZ EN 10149-2 (Hot-rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels) | 22 | chevron_right |
| MSZ EN 10149-3 MSZ EN 10149-3 (Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels) | 8 | chevron_right |
| MSZ EN 10151 MSZ EN 10151 (Stainless steel strip for springs - Technical delivery conditions) | 20 | chevron_right |
| MSZ EN 10152 MSZ EN 10152 (Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions) | 16 | chevron_right |
| MSZ EN 10154 MSZ EN 10154 (Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions) | 20 | chevron_right |
| MSZ EN 10155 MSZ EN 10155 (Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions) | 18 | chevron_right |
| MSZ EN 10165 MSZ EN 10165 (Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state) | 16 | chevron_right |
| MSZ EN 10169-1 MSZ EN 10169-1 (Continuously organic coated (coil coated) steel flat products - Part 1: general information (definitions, materials, tolerances, test methods)) | 15 | chevron_right |
| MSZ EN 10202 MSZ EN 10202 (Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel) | 48 | chevron_right |
| MSZ EN 10203 MSZ EN 10203 (Cold reduced electrolytic tinplate) | 8 | chevron_right |
| MSZ EN 10205 MSZ EN 10205 (Cold reduced tinmill products - Blackplate) | 51 | chevron_right |
| MSZ EN 10207 MSZ EN 10207 (Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars) | 9 | chevron_right |
| MSZ EN 10208-1 MSZ EN 10208-1 (Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A) | 10 | chevron_right |
| MSZ EN 10208-2 MSZ EN 10208-2 (Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B) | 32 | chevron_right |
| MSZ EN 10209 MSZ EN 10209 (Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions) | 22 | chevron_right |
| MSZ EN 10210-1 MSZ EN 10210-1 (Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions) | 28 | chevron_right |
| MSZ EN 10210-3 MSZ EN 10210-3 (Hot finished steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels) | 96 | chevron_right |
| MSZ EN 10213 MSZ EN 10213 (Steel castings for pressure purposes) | 66 | chevron_right |
| MSZ EN 10213-2 MSZ EN 10213-2 (Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures) | 26 | chevron_right |
| MSZ EN 10213-3 MSZ EN 10213-3 (Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures) | 14 | chevron_right |
| MSZ EN 10213-4 MSZ EN 10213-4 (Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades) | 20 | chevron_right |
| MSZ EN 10214 MSZ EN 10214 (Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions) | 26 | chevron_right |
| MSZ EN 10215 MSZ EN 10215 (Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions) | 21 | chevron_right |
| MSZ EN 10216-1 MSZ EN 10216-1 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties) | 12 | chevron_right |
| MSZ EN 10216-2 MSZ EN 10216-2 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties) | 58 | chevron_right |
| MSZ EN 10216-3 MSZ EN 10216-3 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes) | 34 | chevron_right |
| MSZ EN 10216-4 MSZ EN 10216-4 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties) | 18 | chevron_right |
| MSZ EN 10216-5 MSZ EN 10216-5 (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes) | 80 | chevron_right |
| MSZ EN 10217-1 MSZ EN 10217-1 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties) | 12 | chevron_right |
| MSZ EN 10217-2 MSZ EN 10217-2 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties) | 8 | chevron_right |
| MSZ EN 10217-3 MSZ EN 10217-3 (Welded steel tubes for pressure purposes - Technical delivery conditions -Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties) | 20 | chevron_right |
| MSZ EN 10217-4 MSZ EN 10217-4 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties) | 4 | chevron_right |
| MSZ EN 10217-5 MSZ EN 10217-5 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties) | 6 | chevron_right |
| MSZ EN 10217-6 MSZ EN 10217-6 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties) | 4 | chevron_right |
| MSZ EN 10217-7 MSZ EN 10217-7 (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes) | 46 | chevron_right |
| MSZ EN 10219-1 MSZ EN 10219-1 (Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions) | 40 | chevron_right |
| MSZ EN 10219-3 MSZ EN 10219-3 (Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels) | 88 | chevron_right |
| MSZ EN 10222-2 MSZ EN 10222-2 (Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties) | 34 | chevron_right |
| MSZ EN 10222-3 MSZ EN 10222-3 (Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties) | 10 | chevron_right |
| MSZ EN 10222-4 MSZ EN 10222-4 (Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength) | 26 | chevron_right |
| MSZ EN 10222-5 MSZ EN 10222-5 (Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels) | 60 | chevron_right |
| MSZ EN 10224 MSZ EN 10224 (Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions) | 6 | chevron_right |
| MSZ EN 10225 MSZ EN 10225 (Weldable structural steels for fixed offshore structures - Technical delivery conditions) | 96 | chevron_right |
| MSZ EN 10225-1 MSZ EN 10225-1 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 1: Plates) | 22 | chevron_right |
| MSZ EN 10225-2 MSZ EN 10225-2 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 2: Sections) | 18 | chevron_right |
| MSZ EN 10225-3 MSZ EN 10225-3 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 3: Hot finished hollow sections) | 24 | chevron_right |
| MSZ EN 10225-4 MSZ EN 10225-4 (Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections) | 18 | chevron_right |
| MSZ EN 10248-1 MSZ EN 10248-1 (Hot-rolled steel sheet piles - Part 1: Technical delivery conditions) | 16 | chevron_right |
| MSZ EN 10249-1 MSZ EN 10249-1 (Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions) | 6 | chevron_right |
| MSZ EN 10250-2 MSZ EN 10250-2 (Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels) | 47 | chevron_right |
| MSZ EN 10250-3 MSZ EN 10250-3 (Open die steel forgings for general engineering purposes - Part 3: Alloy special steels) | 42 | chevron_right |
| MSZ EN 10250-4 MSZ EN 10250-4 (Open die steel forgings for general engineering purposes - Part 4: Stainless steels) | 70 | chevron_right |
| MSZ EN 10253-1 MSZ EN 10253-1 (Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements) | 2 | chevron_right |
| MSZ EN 10253-2 MSZ EN 10253-2 (Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements) | 64 | chevron_right |
| MSZ EN 10253-3 MSZ EN 10253-3 (Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements) | 50 | chevron_right |
| MSZ EN 10253-4 MSZ EN 10253-4 (Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements) | 50 | chevron_right |
| MSZ EN 10255 MSZ EN 10255 (Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions) | 2 | chevron_right |
| MSZ EN 10263-2 MSZ EN 10263-2 (Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working) | 18 | chevron_right |
| MSZ EN 10263-3 MSZ EN 10263-3 (Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels) | 50 | chevron_right |
| MSZ EN 10263-4 MSZ EN 10263-4 (Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering) | 72 | chevron_right |
| MSZ EN 10263-5 MSZ EN 10263-5 (Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels) | 38 | chevron_right |
| MSZ EN 10264-4 MSZ EN 10264-4 (Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire) | 10 | chevron_right |
| MSZ EN 10265 MSZ EN 10265 (Magnetics materials - Specification for electrical steel strip and sheet with specified mechanical properties and magnetic polarisation) | 32 | chevron_right |
| MSZ EN 10267 MSZ EN 10267 (Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures) | 20 | chevron_right |
| MSZ EN 10268 MSZ EN 10268 (Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions) | 47 | chevron_right |
| MSZ EN 10269 MSZ EN 10269 (Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties) | 88 | chevron_right |
| MSZ EN 10270-1 MSZ EN 10270-1 (Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire) | 5 | chevron_right |
| MSZ EN 10270-2 MSZ EN 10270-2 (Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire) | 12 | chevron_right |
| MSZ EN 10270-3 MSZ EN 10270-3 (Steel wire for mechanical springs - Part 3: Stainless spring steel wire) | 12 | chevron_right |
| MSZ EN 10271 MSZ EN 10271 (Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions) | 15 | chevron_right |
| MSZ EN 10272 MSZ EN 10272 (Stainless steel bars for pressure purposes) | 70 | chevron_right |
| MSZ EN 10273 MSZ EN 10273 (Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties) | 32 | chevron_right |
| MSZ EN 10277 MSZ EN 10277 (Bright steel products - Technical delivery conditions) | 169 | chevron_right |
| MSZ EN 10277-2 MSZ EN 10277-2 (Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes) | 29 | chevron_right |
| MSZ EN 10277-3 MSZ EN 10277-3 (Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels) | 34 | chevron_right |
| MSZ EN 10277-4 MSZ EN 10277-4 (Bright steel products - Technical delivery conditions - Part 4: Case-hardening steels) | 20 | chevron_right |
| MSZ EN 10277-5 MSZ EN 10277-5 (Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering) | 34 | chevron_right |
| MSZ EN 10283 MSZ EN 10283 (Corrosion resistant steel castings) | 61 | chevron_right |
| MSZ EN 10292 MSZ EN 10292 (Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions) | 197 | chevron_right |
| MSZ EN 10293 MSZ EN 10293 (Steel castings for general engineering uses) | 66 | chevron_right |
| MSZ EN 10294-1 MSZ EN 10294-1 (Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels) | 10 | chevron_right |
| MSZ EN 10294-2 MSZ EN 10294-2 (Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties) | 20 | chevron_right |
| MSZ EN 10295 MSZ EN 10295 (Heat resistant steel castings) | 58 | chevron_right |
| MSZ EN 10296-1 MSZ EN 10296-1 (Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes) | 34 | chevron_right |
| MSZ EN 10296-2 MSZ EN 10296-2 (Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel) | 66 | chevron_right |
| MSZ EN 10297-1 MSZ EN 10297-1 (Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes) | 62 | chevron_right |
| MSZ EN 10297-2 MSZ EN 10297-2 (Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel) | 84 | chevron_right |
| MSZ EN 10302 MSZ EN 10302 (Creep resisting steels, nickel and cobalt alloys) | 70 | chevron_right |
| MSZ EN 10303 MSZ EN 10303 (Thin magnetic steel sheet and strip for use at medium frequencies) | 18 | chevron_right |
| MSZ EN 10304 MSZ EN 10304 (Magnetic materials (iron and steel) for use in relays) | 5 | chevron_right |
| MSZ EN 10305-1 MSZ EN 10305-1 (Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes) | 30 | chevron_right |
| MSZ EN 10305-2 MSZ EN 10305-2 (Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes) | 10 | chevron_right |
| MSZ EN 10305-3 MSZ EN 10305-3 (Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes) | 50 | chevron_right |
| MSZ EN 10305-4 MSZ EN 10305-4 (Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems) | 6 | chevron_right |
| MSZ EN 10305-5 MSZ EN 10305-5 (Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes) | 32 | chevron_right |
| MSZ EN 10305-6 MSZ EN 10305-6 (Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems) | 10 | chevron_right |
| MSZ EN 10323 MSZ EN 10323 (Steel wire and wire products - Bead wire) | 5 | chevron_right |
| MSZ EN 10324 MSZ EN 10324 (Steel wire and wire products - Hose reinforcement wire) | 3 | chevron_right |
| MSZ EN 10326 MSZ EN 10326 (Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions) | 56 | chevron_right |
| MSZ EN 10327 MSZ EN 10327 (Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions) | 84 | chevron_right |
| MSZ EN 10331 MSZ EN 10331 (Magnetic materials - Specification for sintered soft magnetic materials) | 14 | chevron_right |
| MSZ EN 10336 MSZ EN 10336 (Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming) | 50 | chevron_right |
| MSZ EN 10338 MSZ EN 10338 (Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions) | 73 | chevron_right |
| MSZ EN 10340 MSZ EN 10340 (Steel castings for structural uses) | 24 | chevron_right |
| MSZ EN 10341 MSZ EN 10341 (Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state) | 28 | chevron_right |
| MSZ EN 10343 MSZ EN 10343 (Steels for quenching and tempering for construction purposes - Technical delivery conditions) | 26 | chevron_right |
| MSZ EN 10346 MSZ EN 10346 (Continuously hot-dip coated steel flat products - Technical delivery conditions) | 485 | chevron_right |
| MSZ EN 10349 MSZ EN 10349 (Steel castings - Austenitic manganese steel castings) | 18 | chevron_right |
| MSZ EN 10378 MSZ EN 10378 (Welded stainless steel square and rectangular tubes for mechanical and structural engineering and decorative use - Technical delivery conditions) | 46 | chevron_right |
| MSZ EN 1044 MSZ EN 1044 (Brazing - Filler metals) | 184 | chevron_right |
| MSZ EN 1057 MSZ EN 1057 (Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications) | 2 | chevron_right |
| MSZ EN 1094-2 MSZ EN 1094-2 (Insulating refractory products - Part 2: Classification of shaped products (ISO 2245:1990 modified)) | 24 | chevron_right |
| MSZ EN 1172 MSZ EN 1172 (Copper and copper alloys - Sheet and strip for building purposes) | 12 | chevron_right |
| MSZ EN 1179 MSZ EN 1179 (Zinc an zinc alloys - Primary zinc) | 5 | chevron_right |
| MSZ EN 12070 MSZ EN 12070 (Welding consumables - Wire electrodes, wires and rods for arc welding of creep-resisting steels) | 63 | chevron_right |
| MSZ EN 12071 MSZ EN 12071 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels) | 8 | chevron_right |
| MSZ EN 12072 MSZ EN 12072 (Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels) | 39 | chevron_right |
| MSZ EN 12163 MSZ EN 12163 (Copper and copper alloys - Rod for general purposes) | 110 | chevron_right |
| MSZ EN 12164 MSZ EN 12164 (Copper and copper alloys - Rod for free machining purposes) | 90 | chevron_right |
| MSZ EN 12165 MSZ EN 12165 (Copper and copper alloys - Wrought and unwrought forging stock) | 126 | chevron_right |
| MSZ EN 12166 MSZ EN 12166 (Copper and copper alloys - Wire for general purposes) | 104 | chevron_right |
| MSZ EN 12167 MSZ EN 12167 (Copper and copper alloys - Profiles and bars for general purposes) | 142 | chevron_right |
| MSZ EN 12168 MSZ EN 12168 (Copper and copper alloys - Hollow rod for free machining purposes) | 64 | chevron_right |
| MSZ EN 12369-1 MSZ EN 12369-1 (Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards) | 11 | chevron_right |
| MSZ EN 12369-3 MSZ EN 12369-3 (Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels) | 3 | chevron_right |
| MSZ EN 12392 MSZ EN 12392 (Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment) | 94 | chevron_right |
| MSZ EN 12420 MSZ EN 12420 (Copper and copper alloys - Forgings) | 126 | chevron_right |
| MSZ EN 12421 MSZ EN 12421 (Magnesium and magnesium alloys - Unalloyed magnesium) | 23 | chevron_right |
| MSZ EN 12438 MSZ EN 12438 (Magnesium and magnesium alloys - Magnesium alloys for cast anodes) | 30 | chevron_right |
| MSZ EN 12449 MSZ EN 12449 (Copper and copper alloys - Seamless, round tubes for general purposes) | 94 | chevron_right |
| MSZ EN 12450 MSZ EN 12450 (Copper and copper alloys - Seamless, round copper capillary tubes) | 2 | chevron_right |
| MSZ EN 12451 MSZ EN 12451 (Copper and copper alloys - Seamless, round tubes for heat exchangers) | 16 | chevron_right |
| MSZ EN 12452 MSZ EN 12452 (Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers) | 10 | chevron_right |
| MSZ EN 12475-1 MSZ EN 12475-1 (Classification of dense shaped refractory products - Part 1: Alumina-silica products) | 13 | chevron_right |
| MSZ EN 12475-2 MSZ EN 12475-2 (Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon) | 31 | chevron_right |
| MSZ EN 12475-3 MSZ EN 12475-3 (Classification of dense shaped refractory products - Part 3: Basic products containing from 7% to 30% residual carbon) | 55 | chevron_right |
| MSZ EN 12475-4 MSZ EN 12475-4 (Classification of dense shaped refractory products - Part 4: Special products) | 80 | chevron_right |
| MSZ EN 12476 MSZ EN 12476 (Phosphate conversion coatings of metals - Method of specifying requirements) | 4 | chevron_right |
| MSZ EN 12496 MSZ EN 12496 (Galvanic anodes for cathodic protection in seawater and saline mud) | 10 | chevron_right |
| MSZ EN 12513 MSZ EN 12513 (Founding - Abrasion resistant cast irons) | 38 | chevron_right |
| MSZ EN 12516-4 MSZ EN 12516-4 (Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel) | 78 | chevron_right |
| MSZ EN 12535 MSZ EN 12535 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels) | 11 | chevron_right |
| MSZ EN 12536 MSZ EN 12536 (Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification) | 6 | chevron_right |
| MSZ EN 12548 MSZ EN 12548 (Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves) | 32 | chevron_right |
| MSZ EN 12588 MSZ EN 12588 (Lead and lead alloys - Rolled lead sheet for building purposes) | 1 | chevron_right |
| MSZ EN 12659 MSZ EN 12659 (Lead and lead alloys - Lead) | 8 | chevron_right |
| MSZ EN 12735-1 MSZ EN 12735-1 (Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems) | 4 | chevron_right |
| MSZ EN 12735-2 MSZ EN 12735-2 (Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment) | 2 | chevron_right |
| MSZ EN 12765 MSZ EN 12765 (Classification of thermosetting wood adhesive for non-structural applications) | 4 | chevron_right |
| MSZ EN 12844 MSZ EN 12844 (Zinc and zinc alloys - Castings - Specifications) | 16 | chevron_right |
| MSZ EN 12861 MSZ EN 12861 (Copper and copper alloys - Scrap) | 83 | chevron_right |
| MSZ EN 12952-2 MSZ EN 12952-2 (Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories) | 114 | chevron_right |
| MSZ EN 12953-2 MSZ EN 12953-2 (Shell boilers - Part 2: Materials for pressure parts of boilers and accessories) | 29 | chevron_right |
| MSZ EN 1301-2 MSZ EN 1301-2 (Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties) | 45 | chevron_right |
| MSZ EN 13148 MSZ EN 13148 (Copper and copper alloys - Hot-dip tinned strip) | 56 | chevron_right |
| MSZ EN 13195 MSZ EN 13195 (Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)) | 48 | chevron_right |
| MSZ EN 13195-1 MSZ EN 13195-1 (Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1: Specifications) | 20 | chevron_right |
| MSZ EN 13261 MSZ EN 13261 (Railway applications - Wheelsets and bogies - Axles - Product requirements) | 3 | chevron_right |
| MSZ EN 13262 MSZ EN 13262 (Railway applications - Wheelsets and bogies - Wheels - Product requirements) | 5 | chevron_right |
| MSZ EN 13283 MSZ EN 13283 (Zinc and zinc alloys - Secondary zinc) | 3 | chevron_right |
| MSZ EN 13347 MSZ EN 13347 (Copper and copper alloys - Rod and wire for welding and braze welding) | 58 | chevron_right |
| MSZ EN 13348 MSZ EN 13348 (Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum) | 2 | chevron_right |
| MSZ EN 13353 MSZ EN 13353 (Solid wood panels (SWP) - Requirements) | 9 | chevron_right |
| MSZ EN 13445-2 MSZ EN 13445-2 (Unfired pressure vessels - Part 2: Materials) | 408 | chevron_right |
| MSZ EN 13445-6 MSZ EN 13445-6 (Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron) | 20 | chevron_right |
| MSZ EN 13445-8 MSZ EN 13445-8 (Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys) | 34 | chevron_right |
| MSZ EN 13480-2 MSZ EN 13480-2 (Metallic industrial piping - Part 2: Materials) | 406 | chevron_right |
| MSZ EN 13599 MSZ EN 13599 (Copper and copper alloys - Copper plate, sheet and strip for electrical purposes) | 16 | chevron_right |
| MSZ EN 13600 MSZ EN 13600 (Copper and copper alloys - Seamless copper tubes for electrical purposes) | 20 | chevron_right |
| MSZ EN 13601 MSZ EN 13601 (Copper and copper alloys - Copper rod, bar and wire for general electrical purposes) | 32 | chevron_right |
| MSZ EN 13602 MSZ EN 13602 (Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors) | 10 | chevron_right |
| MSZ EN 13604 MSZ EN 13604 (Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper) | 4 | chevron_right |
| MSZ EN 13605 MSZ EN 13605 (Copper and copper alloys - Copper profiles and profiled wire for electrical purposes) | 36 | chevron_right |
| MSZ EN 13674-1 MSZ EN 13674-1 (Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above) | 18 | chevron_right |
| MSZ EN 13674-2 MSZ EN 13674-2 (Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above) | 18 | chevron_right |
| MSZ EN 13674-3 MSZ EN 13674-3 (Railway applications - Track - Rail - Part 3: Check rails) | 6 | chevron_right |
| MSZ EN 13674-4 MSZ EN 13674-4 (Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m) | 15 | chevron_right |
| MSZ EN 13835 MSZ EN 13835 (Founding - Austenitic cast irons) | 36 | chevron_right |
| MSZ EN 1386 MSZ EN 1386 (Aluminium and aluminium alloys - Tread plate - Specifications) | 22 | chevron_right |
| MSZ EN 1396 MSZ EN 1396 (Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications) | 62 | chevron_right |
| MSZ EN 13981-1 MSZ EN 13981-1 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products) | 20 | chevron_right |
| MSZ EN 13981-2 MSZ EN 13981-2 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets) | 10 | chevron_right |
| MSZ EN 13981-3 MSZ EN 13981-3 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings) | 17 | chevron_right |
| MSZ EN 13981-4 MSZ EN 13981-4 (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings) | 8 | chevron_right |
| MSZ EN 14121 MSZ EN 14121 (Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications) | 9 | chevron_right |
| MSZ EN 14286 MSZ EN 14286 (Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods) | 18 | chevron_right |
| MSZ EN 14436 MSZ EN 14436 (Copper and copper alloys - Electrolytically tinned strip) | 54 | chevron_right |
| MSZ EN 14700 MSZ EN 14700 (Welding consumables - Welding consumables for hard-facing) | 30 | chevron_right |
| MSZ EN 1561 MSZ EN 1561 (Founding - Grey cast irons) | 41 | chevron_right |
| MSZ EN 1562 MSZ EN 1562 (Founding - Malleable cast irons) | 42 | chevron_right |
| MSZ EN 1563 MSZ EN 1563 (Founding - Spheroidal graphite cast irons) | 93 | chevron_right |
| MSZ EN 1564 MSZ EN 1564 (Founding - Ausferritic spheroidal graphite cast irons) | 33 | chevron_right |
| MSZ EN 15776 MSZ EN 15776 (Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15%) | 33 | chevron_right |
| MSZ EN 1592-2 MSZ EN 1592-2 (Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties) | 24 | chevron_right |
| MSZ EN 1599 MSZ EN 1599 (Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels) | 12 | chevron_right |
| MSZ EN 1600 MSZ EN 1600 (Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels) | 34 | chevron_right |
| MSZ EN 16079 MSZ EN 16079 (Founding - Compacted (vermicular) graphite cast irons) | 15 | chevron_right |
| MSZ EN 16124 MSZ EN 16124 (Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications) | 18 | chevron_right |
| MSZ EN 16482 MSZ EN 16482 (Founding - Continuous cast iron bars) | 62 | chevron_right |
| MSZ EN 1652 MSZ EN 1652 (Copper and copper alloys - Plate, sheet, strip and circles for general purposes) | 84 | chevron_right |
| MSZ EN 1653 MSZ EN 1653 (Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units) | 24 | chevron_right |
| MSZ EN 1654 MSZ EN 1654 (Copper and copper alloys - Strip for springs and connectors) | 40 | chevron_right |
| MSZ EN 1668 MSZ EN 1668 (Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels) | 8 | chevron_right |
| MSZ EN 1676 MSZ EN 1676 (Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications) | 101 | chevron_right |
| MSZ EN 16914 MSZ EN 16914 (Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions) | 2 | chevron_right |
| MSZ EN 1706 MSZ EN 1706 (Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties) | 103 | chevron_right |
| MSZ EN 1715-2 MSZ EN 1715-2 (Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications) | 18 | chevron_right |
| MSZ EN 1715-3 MSZ EN 1715-3 (Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding)) | 49 | chevron_right |
| MSZ EN 1715-4 MSZ EN 1715-4 (Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications) | 20 | chevron_right |
| MSZ EN 1753 MSZ EN 1753 (Magnesium and magnesium alloys - Magnesium alloy ingots and castings) | 158 | chevron_right |
| MSZ EN 1758 MSZ EN 1758 (Copper and copper alloys - Strip for lead frames) | 6 | chevron_right |
| MSZ EN 1774 MSZ EN 1774 (Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid) | 8 | chevron_right |
| MSZ EN 197-1 MSZ EN 197-1 (Cement - Part 1: Composition, specifications and conformity criteria for common cements) | 162 | chevron_right |
| MSZ EN 1976 MSZ EN 1976 (Copper and copper alloys - Cast unwrought copper products) | 44 | chevron_right |
| MSZ EN 1977 MSZ EN 1977 (Copper and copper alloys - Copper drawing stock (wire rod)) | 36 | chevron_right |
| MSZ EN 1978 MSZ EN 1978 (Copper and copper alloys - Copper cathodes) | 4 | chevron_right |
| MSZ EN 1981 MSZ EN 1981 (Copper and copper alloys - Master alloys) | 78 | chevron_right |
| MSZ EN 1982 MSZ EN 1982 (Copper and copper alloys - Ingots and castings) | 206 | chevron_right |
| MSZ EN 2030 MSZ EN 2030 (Aerospace series-Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De ≤ 150 mm) | 2 | chevron_right |
| MSZ EN 2031 MSZ EN 2031 (Aerospace series - Steel 102Cr6 (1.2067) - Hardened and tempered - Bars) | 2 | chevron_right |
| MSZ EN 204 MSZ EN 204 (Classification of thermoplastic wood adhesives for non-structural applications) | 4 | chevron_right |
| MSZ EN 2072 MSZ EN 2072 (Aerospace series - Aluminium AL-P1050A - H14 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 2085 MSZ EN 2085 (Aerospace series - Aluminium alloy AL-P2618A-T6 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| MSZ EN 2086 MSZ EN 2086 (Aerospace series. Aluminium alloy AL-P2618A-T851. Hand and die forgings. a ≤ 150 mm) | 1 | chevron_right |
| MSZ EN 2087 MSZ EN 2087 (Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheets and strips 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 2088 MSZ EN 2088 (Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 2089 MSZ EN 2089 (Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 20898-1 MSZ EN 20898-1 (Mechanical properties of fasteners - Part 1: Bolts, screws and studs) | 10 | chevron_right |
| MSZ EN 20898-2 MSZ EN 20898-2 (Mechanical properties of fasteners - Part 2: Nuts with specified proof load values) | 8 | chevron_right |
| MSZ EN 20898-6 MSZ EN 20898-6 (Mechanical properties of fasteners - Part 6: Nuts with specified proof load values) | 7 | chevron_right |
| MSZ EN 2090 MSZ EN 2090 (Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 2092 MSZ EN 2092 (Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 2093 MSZ EN 2093 (Aerospace series - Aluminium alloy AL-P7009-T74 - Hand forgings 20 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| MSZ EN 2094 MSZ EN 2094 (Aerospace series - Aluminium alloy AL-P7009-T74 - Die forgings 3 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| MSZ EN 2100 MSZ EN 2100 (Aerospace series - Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D ≤ 200 mm) | 1 | chevron_right |
| MSZ EN 2104 MSZ EN 2104 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD) | 1 | chevron_right |
| MSZ EN 2114 MSZ EN 2114 (Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D ≤ 10 mm) | 1 | chevron_right |
| MSZ EN 2115 MSZ EN 2115 (Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D ≤ 10 mm No) | 1 | chevron_right |
| MSZ EN 2116 MSZ EN 2116 (Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D ≤ 10 mm No) | 1 | chevron_right |
| MSZ EN 2117 MSZ EN 2117 (Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D ≤ 10 mm) | 1 | chevron_right |
| MSZ EN 2119 MSZ EN 2119 (Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960 MPa) | 2 | chevron_right |
| MSZ EN 2125 MSZ EN 2125 (Aerospace series - Aluminium alloy Al-P16-T6151 - Plates - 6 mm < a ≤ 120 mm) | 1 | chevron_right |
| MSZ EN 2126 MSZ EN 2126 (Aerospace series - Aluminium alloy AL-P7075-T651 - Plates 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| MSZ EN 2127 MSZ EN 2127 (Aerospace series - Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D ≤ 100 mm) | 1 | chevron_right |
| MSZ EN 2128 MSZ EN 2128 (Aerospace series - Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm ≤ a or D ≤ 75 mm) | 1 | chevron_right |
| MSZ EN 2135 MSZ EN 2135 (Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - De ≤ 40 mm) | 1 | chevron_right |
| MSZ EN 2137 MSZ EN 2137 (Aerospace series - Steel FE-PL75 - 1 100 MPa ≤ Rm ≤ 1 250 MPa - Bars - De ≤ 100 mm) | 1 | chevron_right |
| MSZ EN 2174 MSZ EN 2174 (Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - De ≤ 100 mm - Rm ≥ 850 MPa) | 2 | chevron_right |
| MSZ EN 2205 MSZ EN 2205 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| MSZ EN 2206 MSZ EN 2206 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 650 MPa ≤ Rm ≤ 850 MPa - Bars - De ≤ 150 mm) | 2 | chevron_right |
| MSZ EN 2209 MSZ EN 2209 (Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheets, strips and plates - 0,5 mm ≤ a ≤ 20 mm) | 2 | chevron_right |
| MSZ EN 2213 MSZ EN 2213 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Bars - De ≤ 16 mm - 980 MPa ≤ Rm ≤ 1 180 MPa) | 3 | chevron_right |
| MSZ EN 2221 MSZ EN 2221 (Aerospace series - Steel FE-PL31 - Hardened and tempered - Hollow bars - 3,5 mm ≤ a ≤ 55 mm) | 1 | chevron_right |
| MSZ EN 2222 MSZ EN 2222 (Aerospace series - Steel FE-PL31 - Hardened and tempered - Hand and die forgings) | 1 | chevron_right |
| MSZ EN 2226 MSZ EN 2226 (Aerospace series - Steel X105CrMo17 (1.4125) - Hardened and tempered - Hand and die forgings - De ≤ 150 mm) | 2 | chevron_right |
| MSZ EN 2252 MSZ EN 2252 (Aerospace series - Steel 15CrMoV6 (1.7334) - Forgings - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 250 MPa) | 3 | chevron_right |
| MSZ EN 2256 MSZ EN 2256 (Aerospace series - Aluminium alloy AL-P2618A - T852 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| MSZ EN 2259 MSZ EN 2259 (Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD) | 1 | chevron_right |
| MSZ EN 2260 MSZ EN 2260 (Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD) | 1 | chevron_right |
| MSZ EN 2261 MSZ EN 2261 (Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD) | 1 | chevron_right |
| MSZ EN 2262 MSZ EN 2262 (Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD) | 1 | chevron_right |
| MSZ EN 2278 MSZ EN 2278 (Aerospace series - Steel X12CrNiMoV12-3 (1.4933) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 150 mm) | 2 | chevron_right |
| MSZ EN 2279 MSZ EN 2279 (Aerospace series - Steel FE-PM37 - 900 MPa < Rm < 1 100 MPa - Forgings - De < 150 mm) | 1 | chevron_right |
| MSZ EN 2280 MSZ EN 2280 (Aerospace series - Steel FE-PM37 - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheet - a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 2302 MSZ EN 2302 (Aerospace series - Heat-resisting nickel base alloy NiCr20Co3Fe3 - Rm ≥ 650 MPa - Sheets and strips, cold rolled - 0,25 mm < a ≤ 3 mm) | 1 | chevron_right |
| MSZ EN 2306 MSZ EN 2306 (Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars) | 1 | chevron_right |
| MSZ EN 2318 MSZ EN 2318 (Aerospace series - Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm ≤ a or D ≤ 150 mm) | 1 | chevron_right |
| MSZ EN 2319 MSZ EN 2319 (Aerospace series - Aluminium alloy 2024- - T3510 - Drawn bar - a < 75 mm) | 1 | chevron_right |
| MSZ EN 2320 MSZ EN 2320 (Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a ≤ 75 mm) | 1 | chevron_right |
| MSZ EN 2321 MSZ EN 2321 (Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a ≤ 150 m) | 1 | chevron_right |
| MSZ EN 2326 MSZ EN 2326 (Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D ≤ 200 mm) | 1 | chevron_right |
| MSZ EN 2381 MSZ EN 2381 (Aerospace series - Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm ≤ a ≤ 150 mm) | 1 | chevron_right |
| MSZ EN 2384 MSZ EN 2384 (Aerospace series - Aluminium alloy AL-P2014A T6511 - Extruded bars and sections a or D ≤ 150 mm) | 1 | chevron_right |
| MSZ EN 2385 MSZ EN 2385 (Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm) | 1 | chevron_right |
| MSZ EN 2387 MSZ EN 2387 (Aerospace series - Aluminium alloy 2014A - T6 - Tubes for structures - 0,6 mm < a < 12,5 mm) | 1 | chevron_right |
| MSZ EN 2390 MSZ EN 2390 (Aerospace series - Aluminium alloy 6082-T6 - Tubes for structures 0.6 mm ≤ a ≤ 12.5 mm) | 1 | chevron_right |
| MSZ EN 2395 MSZ EN 2395 (Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 2398 MSZ EN 2398 (Aerospace series - Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) - Rm ≥ 900 MPa - Bars for machined bolts - D ≤ 25 mm) | 2 | chevron_right |
| MSZ EN 2399 MSZ EN 2399 (Aerospace series. Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars for forged bolts. D ≤ 25 mm) | 2 | chevron_right |
| MSZ EN 2400 MSZ EN 2400 (Aerospace series - Heat resisting nickel base alloy NI-P96-HT - Cold drawn and precipitation treated - Wire - D ≤ 10 mm) | 1 | chevron_right |
| MSZ EN 2402 MSZ EN 2402 (Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D ≤ 10 mm) | 1 | chevron_right |
| MSZ EN 2422 MSZ EN 2422 (Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm < a ≤ 120 mm) | 1 | chevron_right |
| MSZ EN 2428 MSZ EN 2428 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 50 IRHD) | 1 | chevron_right |
| MSZ EN 2429 MSZ EN 2429 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 60 IRHD) | 1 | chevron_right |
| MSZ EN 2430 MSZ EN 2430 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 70 IRHD) | 1 | chevron_right |
| MSZ EN 2431 MSZ EN 2431 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD) | 1 | chevron_right |
| MSZ EN 2432 MSZ EN 2432 (Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 90 IRHD) | 1 | chevron_right |
| MSZ EN 2438 MSZ EN 2438 (Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| MSZ EN 2439 MSZ EN 2439 (Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Forgings - De ≤ 40 mm) | 2 | chevron_right |
| MSZ EN 2446 MSZ EN 2446 (Aerospace series - Steel FE-PL1503 (35CrMo4) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 25 mm) | 2 | chevron_right |
| MSZ EN 2448 MSZ EN 2448 (Aerospace series - Steel FE-PL1503 (35CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| MSZ EN 2450 MSZ EN 2450 (Aerospace series - Steel 31NiMoCr10-5-3 1230 MPa ≤ Rm ≤ 1420 MPa - Bars - De ≤ 40 mm) | 1 | chevron_right |
| MSZ EN 2451 MSZ EN 2451 (Aerospace series - Steel 31NiMoCr10 - 5 - 3 - 1230 MPa ≤ Rm ≤ 1420 MPa - Forgings - De ≤ 40 mm) | 1 | chevron_right |
| MSZ EN 2460 MSZ EN 2460 (Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa ≤ Rm ≤ 800 MPa - Bars - De ≤ 70 mm) | 2 | chevron_right |
| MSZ EN 2461 MSZ EN 2461 (Aerospace series - Steel FE-PM1901 (X12Cr13) - 600 MPa ≤ Rm ≤ 800 MPa - Forgings - De ≤ 70 mm) | 2 | chevron_right |
| MSZ EN 2465 MSZ EN 2465 (Aerospace series - Steel X2CrNi18-9 - Softened - 450 MPa ≤ Rm ≤ 680 MPa - Bar for machining - 4 mm ≤ De ≤ 100 mm) | 2 | chevron_right |
| MSZ EN 2466 MSZ EN 2466 (Aerospace series - Steel FE-PA3901 (X2CrNi19-11) - Softened - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| MSZ EN 2467 MSZ EN 2467 (Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets and strips - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa) | 3 | chevron_right |
| MSZ EN 2468 MSZ EN 2468 (Aerospace series - Steel FE-PA11 - Softened - Tubes - 0,5 mm ≤ a ≤ 5 mm) | 1 | chevron_right |
| MSZ EN 2469 MSZ EN 2469 (Aerospace series. Steel FE-PA3901 (X1CrNi18-10). Air melted. Softened. Wires. 0,4 mm ≤ D ≤ 12,5 mm. 450 MPa ≤ Rm ≤ 650 MPa) | 2 | chevron_right |
| MSZ EN 2470 MSZ EN 2470 (Aerospace series - Steel FE-PA11 - Softened and cold drawn - Wires for rivets - 1 mm ≤ D ≤ 10 mm) | 1 | chevron_right |
| MSZ EN 2475 MSZ EN 2475 (Aerospace series - Steel 30CrNiMo8 (1.6580) - Air melted - Hardened and tempered - Bar for machining - De ≤ 100 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| MSZ EN 2476 MSZ EN 2476 (Aerospace series - Steel 30CrNiMo8 (1.6580) - 1100 MPa ≤ Rm ≤ 1300 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| MSZ EN 2478 MSZ EN 2478 (Aerospace series - Steel FE-PL2107 (30NiCrMo16) - 1 220 MPa ≤ Rm ≤ 1 370 MPa - Bars - De ≤ 40 mm) | 2 | chevron_right |
| MSZ EN 2480 MSZ EN 2480 (Aerospace series - Steel 36NiCrMo16 (1.6773) - 1250 MPa ≤ Rm ≤ 1400 MPa - Bars - De ≤ 75 mm) | 2 | chevron_right |
| MSZ EN 2481 MSZ EN 2481 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Forgings - De ≤ 75 mm) | 2 | chevron_right |
| MSZ EN 2482 MSZ EN 2482 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 100 mm) | 2 | chevron_right |
| MSZ EN 2483 MSZ EN 2483 (Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| MSZ EN 2486 MSZ EN 2486 (Aerospace series - Aluminium alloy AL-P2618A - Forging stock) | 1 | chevron_right |
| MSZ EN 2502 MSZ EN 2502 (Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1080 MPa - Bars) | 2 | chevron_right |
| MSZ EN 2503 MSZ EN 2503 (Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1080 MPa - Forgings - De ≤ 150 mm) | 2 | chevron_right |
| MSZ EN 2510 MSZ EN 2510 (Aerospace series - Aluminium alloy 2024 - T42 - Drawn tubes for structural applications) | 1 | chevron_right |
| MSZ EN 2511 MSZ EN 2511 (Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm < a ≤ 100 mm) | 1 | chevron_right |
| MSZ EN 2512 MSZ EN 2512 (Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6mm < a ≤ 100 mm) | 1 | chevron_right |
| MSZ EN 2540 MSZ EN 2540 (Aerospace series - Steel X7CrNiAl17-7 (1.4568) - Air melted - Solution treated and precipitation hardened - Sheet and strip - a ≤ 6 mm - 1 240 MPa ≤ Rm ≤ 1 450 MPa) | 2 | chevron_right |
| MSZ EN 2541 MSZ EN 2541 (Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Wire for spring - D ≤ 4,0 mm) | 1 | chevron_right |
| MSZ EN 2542 MSZ EN 2542 (Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Bar and wire - De ≤ 40 mm - For prevailing torque nuts) | 2 | chevron_right |
| MSZ EN 2543 MSZ EN 2543 (Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Sheet and strip - 0,3 mm ≤ a ≤ 2 mm - For prevailing torque nuts) | 2 | chevron_right |
| MSZ EN 2566 MSZ EN 2566 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD) | 1 | chevron_right |
| MSZ EN 2567 MSZ EN 2567 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 80 IRHD) | 1 | chevron_right |
| MSZ EN 2568 MSZ EN 2568 (Aerospace series - Fluorocarbon rubber (FKM) - Hardness 90 IRHD) | 1 | chevron_right |
| MSZ EN 2573 MSZ EN 2573 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Wires - 0,25 mm ≤ De ≤ 3 mm - Rm ≤ 780 MPa) | 3 | chevron_right |
| MSZ EN 2630 MSZ EN 2630 (Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm with peripheral coarse grain control) | 1 | chevron_right |
| MSZ EN 2632 MSZ EN 2632 (Aerospace series - Aluminium alloy AL-P7075 - T73511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| MSZ EN 2633 MSZ EN 2633 (Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Extruded bars and sections - 1,2 mm ≤ De ≤ 160 mm with peripheral coarse grain control) | 1 | chevron_right |
| MSZ EN 2635 MSZ EN 2635 (Aerospace series - Aluminium alloy AL-P2014A-T6511 - Extruded bar and section - a or D ≤ 200 mm with peripheral coarse grain control) | 1 | chevron_right |
| MSZ EN 2636 MSZ EN 2636 (Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D ≤ 200 mm with peripheral coarse grain control) | 1 | chevron_right |
| MSZ EN 2638 MSZ EN 2638 (Aerospace series - Aluminium alloy 2024-T3 - Extruded bar and section - 1,2 mm ≤ (a or D) ≤ 150 mm with coarse peripheral grain control) | 1 | chevron_right |
| MSZ EN 2681 MSZ EN 2681 (Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings - a ≤ 150 mm) | 1 | chevron_right |
| MSZ EN 2684 MSZ EN 2684 (Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm < a ≤ 140 mm) | 1 | chevron_right |
| MSZ EN 26848 MSZ EN 26848 (Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding) | 9 | chevron_right |
| MSZ EN 2687 MSZ EN 2687 (Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| MSZ EN 26871 MSZ EN 26871 (Dentistry; dental base metal casting alloys (ISO 6871:1987)) | 1 | chevron_right |
| MSZ EN 2693 MSZ EN 2693 (Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 2694 MSZ EN 2694 (Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 2695 MSZ EN 2695 (Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 2696 MSZ EN 2696 (Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 2699 MSZ EN 2699 (Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm < D < 50 mm) | 1 | chevron_right |
| MSZ EN 2702 MSZ EN 2702 (Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Drawn or extruded bar and section - a or D ≤ 200 mm) | 1 | chevron_right |
| MSZ EN 2703 MSZ EN 2703 (Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 2704 MSZ EN 2704 (Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Drawn bars - De ≤ 75 mm) | 1 | chevron_right |
| MSZ EN 2709 MSZ EN 2709 (Aerospace series - Aluminium alloy 2024 - T3510 - Bars and sections -1.2 mm ≤ (a or D) ≤ 150 mm - With peripheral coarse grain control) | 1 | chevron_right |
| MSZ EN 2726 MSZ EN 2726 (Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a ≤ 20 mm) | 1 | chevron_right |
| MSZ EN 2728 MSZ EN 2728 (Aerospace series - Aluminium alloy AL-C42101 - T6 - Sand casting - a ≤ 20 mm) | 1 | chevron_right |
| MSZ EN 2731 MSZ EN 2731 (Aerospace series - Magnesium alloy MG-C46001 - T6 - Sand casting) | 1 | chevron_right |
| MSZ EN 2732 MSZ EN 2732 (Aerospace series - Magnesium alloy MG-C46001-T6 - Chill casting) | 1 | chevron_right |
| MSZ EN 2795 MSZ EN 2795 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD) | 1 | chevron_right |
| MSZ EN 2796 MSZ EN 2796 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD) | 1 | chevron_right |
| MSZ EN 2798 MSZ EN 2798 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD) | 1 | chevron_right |
| MSZ EN 2799 MSZ EN 2799 (Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD) | 1 | chevron_right |
| MSZ EN 2802 MSZ EN 2802 (Aerospace series - Aluminium alloy AL-P7475-T761 - Sheet and strip - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 2803 MSZ EN 2803 (Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 2813 MSZ EN 2813 (Aerospace series - Aluminium alloy AL-P-6061 - T6 - Drawn tube for pressure applications - 0,6 mm ≤ a ≤ 12,5 mm) | 1 | chevron_right |
| MSZ EN 2815 MSZ EN 2815 (Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 965 MPa) | 2 | chevron_right |
| MSZ EN 2816 MSZ EN 2816 (Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 965 MPa) | 2 | chevron_right |
| MSZ EN 2817 MSZ EN 2817 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1070 MPa) | 2 | chevron_right |
| MSZ EN 2818 MSZ EN 2818 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1070 MPa) | 2 | chevron_right |
| MSZ EN 2821 MSZ EN 2821 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D ≤ 200 mm - Rm ≥ 1310 MPa) | 3 | chevron_right |
| MSZ EN 2835 MSZ EN 2835 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 40 IRHD) | 1 | chevron_right |
| MSZ EN 2836 MSZ EN 2836 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 50 IRHD) | 1 | chevron_right |
| MSZ EN 2837 MSZ EN 2837 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 60 IRHD) | 1 | chevron_right |
| MSZ EN 2838 MSZ EN 2838 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD) | 1 | chevron_right |
| MSZ EN 2839 MSZ EN 2839 (Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD) | 1 | chevron_right |
| MSZ EN 2840 MSZ EN 2840 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 50 IRHD) | 1 | chevron_right |
| MSZ EN 2841 MSZ EN 2841 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 60 IRHD) | 1 | chevron_right |
| MSZ EN 2842 MSZ EN 2842 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 70 IRHD) | 1 | chevron_right |
| MSZ EN 2843 MSZ EN 2843 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD) | 1 | chevron_right |
| MSZ EN 2844 MSZ EN 2844 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 90 IRHD) | 1 | chevron_right |
| MSZ EN 2845 MSZ EN 2845 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 50 IRHD) | 1 | chevron_right |
| MSZ EN 2846 MSZ EN 2846 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 60 IRHD) | 1 | chevron_right |
| MSZ EN 2847 MSZ EN 2847 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 70 IRHD) | 1 | chevron_right |
| MSZ EN 2848 MSZ EN 2848 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 80 IRHD) | 1 | chevron_right |
| MSZ EN 2849 MSZ EN 2849 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD) | 1 | chevron_right |
| MSZ EN 286-4 MSZ EN 286-4 (Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway folling stock) | 10 | chevron_right |
| MSZ EN 28839 MSZ EN 28839 (Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals) | 28 | chevron_right |
| MSZ EN 29453 MSZ EN 29453 (Soft solder alloys. Chemical compositions and forms) | 74 | chevron_right |
| MSZ EN 2947 MSZ EN 2947 (Aerospace series. Steel FE-PA3004 (X10CrNi18-09). Air melted. Non heat treated. Cold drawn wire. a or D ≤ 2,3 mm) | 2 | chevron_right |
| MSZ EN 2952 MSZ EN 2952 (Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1270 MPa ≤ Rm ≤ 1550 MPa) | 1 | chevron_right |
| MSZ EN 2959 MSZ EN 2959 (Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners 3 mm ≤ D ≤ 30 mm) | 2 | chevron_right |
| MSZ EN 2960 MSZ EN 2960 (Aerospace series - Heat resisting nickel base alloy (NI-P101HT), Cold worked and solution treated - Bars for machining for fasteners 3 mm ≤ D ≤ 50 mm) | 1 | chevron_right |
| MSZ EN 300 MSZ EN 300 (Oriented Strand Boards (OSB) - Definitions, classification and specifications) | 4 | chevron_right |
| MSZ EN 3018 MSZ EN 3018 (Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D ≤ 3 mm) | 2 | chevron_right |
| MSZ EN 3115 MSZ EN 3115 (Aerospace series. Aluminium alloy 7050-T73. Wire for solid rivets. D ≤ 10 mm) | 1 | chevron_right |
| MSZ EN 312 MSZ EN 312 (Particleboards - Specifications) | 7 | chevron_right |
| MSZ EN 3120 MSZ EN 3120 (Aerospace series - Titanium alloy TI-P64003 - Cold worked and stress relieved - Seamless tube for pressure systems - 4 mm ≤ D ≤ 51 mm - 690 MPa ≤ Rm ≤ 1 030 MPa) | 1 | chevron_right |
| MSZ EN 3160 MSZ EN 3160 (Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1310 MPa) | 2 | chevron_right |
| MSZ EN 3161 MSZ EN 3161 (Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa) | 2 | chevron_right |
| MSZ EN 3162 MSZ EN 3162 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 930 MPa) | 3 | chevron_right |
| MSZ EN 3163 MSZ EN 3163 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| MSZ EN 3219 MSZ EN 3219 (Aerospace series - Heat resisting nickel base alloy (NI-P100HT) - Cold worked and softened - Bar and wire for continuous forging extrusion for fasteners - 3 mm ≤ D ≤ 30 mm) | 1 | chevron_right |
| MSZ EN 3220 MSZ EN 3220 (Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm ≤ D ≤ 30 mm) | 1 | chevron_right |
| MSZ EN 3310 MSZ EN 3310 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Not heat treated - Forging stock, for annealed forgings - De ≤ 360 mm) | 2 | chevron_right |
| MSZ EN 3311 MSZ EN 3311 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar for machining - D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1160 MPa) | 2 | chevron_right |
| MSZ EN 3312 MSZ EN 3312 (Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Forgings De ≤ 150 mm) | 2 | chevron_right |
| MSZ EN 3314 MSZ EN 3314 (Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D ≤ 75 mm) | 1 | chevron_right |
| MSZ EN 3315 MSZ EN 3315 (Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Forgings - De ≤ 75 mm) | 2 | chevron_right |
| MSZ EN 3329 MSZ EN 3329 (Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts) | 2 | chevron_right |
| MSZ EN 3330 MSZ EN 3330 (Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealead - Bar and wire - De ≤ 40 mm - For prevailing torque nuts) | 2 | chevron_right |
| MSZ EN 3332 MSZ EN 3332 (Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 3333 MSZ EN 3333 (Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 3335 MSZ EN 3335 (Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 3338 MSZ EN 3338 (Aerospace series - Aluminium alloy AL-P7050 - T74511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| MSZ EN 3339 MSZ EN 3339 (Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a ≤ 200 mm) | 1 | chevron_right |
| MSZ EN 3341 MSZ EN 3341 (Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 3342 MSZ EN 3342 (Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Drawn or extruded bar and section - a or D ≤ 150 mm) | 1 | chevron_right |
| MSZ EN 3344 MSZ EN 3344 (Aerospace series - Aluminium alloy AL-P7050-T76511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| MSZ EN 3347 MSZ EN 3347 (Aerospace series - Aluminium alloy AL-P2024 - T8511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control) | 1 | chevron_right |
| MSZ EN 3351 MSZ EN 3351 (Aerospace series. Titanium alloy Ti-4Al-4Mo-2Sn. Solution treated and aged. Forgings. De ≤ 150 mm) | 1 | chevron_right |
| MSZ EN 3354 MSZ EN 3354 (Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Sheet for superplastic forming. a ≤ 6 mm) | 2 | chevron_right |
| MSZ EN 3355 MSZ EN 3355 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa) | 2 | chevron_right |
| MSZ EN 3357 MSZ EN 3357 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 150 mm - 1 200 MPa ≤ Rm ≤ 1 400 MPa) | 2 | chevron_right |
| MSZ EN 3358 MSZ EN 3358 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 150 mm - Rm ≥ 1400 MPa) | 2 | chevron_right |
| MSZ EN 3359 MSZ EN 3359 (Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Vacuum induction melted and consumable electrode remelted - softened - forging stocks - a or D ≤ 300 mm) | 3 | chevron_right |
| MSZ EN 3361 MSZ EN 3361 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6mm - 1070 MPa ≤ Rm ≤ 1220 MPa) | 3 | chevron_right |
| MSZ EN 3364 MSZ EN 3364 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted, softened - Forging stocks - a or D ≤ 300 mm) | 3 | chevron_right |
| MSZ EN 3365 MSZ EN 3365 (Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted, softened - forging stock - a or D ≤ 300 mm) | 3 | chevron_right |
| MSZ EN 3378 MSZ EN 3378 (Aerospace series - Titanium TI-P99002 - Annealed - Wires for rivets - 1,6 mm ≤ D ≤ 10 mm) | 1 | chevron_right |
| MSZ EN 3451 MSZ EN 3451 (Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock, for annealed forgings - a or D ≤ 300 mm) | 1 | chevron_right |
| MSZ EN 3456 MSZ EN 3456 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled - a ≤ 6 mm) | 2 | chevron_right |
| MSZ EN 3459 MSZ EN 3459 (Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm < a ≤ 50 mm) | 2 | chevron_right |
| MSZ EN 3460 MSZ EN 3460 (Aerospace series - Titanium TI-P99002 - Annealed - Bar for machining - a or D ≤ 150 - Rm ≥ 390 MPa) | 1 | chevron_right |
| MSZ EN 3464 MSZ EN 3464 (Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Plate - 6 mm < a ≤ 100 mm) | 2 | chevron_right |
| MSZ EN 3468 MSZ EN 3468 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 MPa ≤ Rm ≤ 700 MPa - Forgings - De ≤ 100 mm) | 3 | chevron_right |
| MSZ EN 3469 MSZ EN 3469 (Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1310 MPa) | 2 | chevron_right |
| MSZ EN 3470 MSZ EN 3470 (Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - 1200 MPa ≤ Rm ≤ 1400 MPa) | 2 | chevron_right |
| MSZ EN 3471 MSZ EN 3471 (Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Strip for spring - a ≤ 4,0 mm) | 1 | chevron_right |
| MSZ EN 3474 MSZ EN 3474 (Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 3476 MSZ EN 3476 (Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Softened. Forging stock. a or D ≤ 300 mm) | 2 | chevron_right |
| MSZ EN 3479 MSZ EN 3479 (Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Plates - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa) | 3 | chevron_right |
| MSZ EN 3480 MSZ EN 3480 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Plates - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| MSZ EN 3481 MSZ EN 3481 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Hollow bars - 5 mm ≤ a ≤ 12 mm) | 3 | chevron_right |
| MSZ EN 3482 MSZ EN 3482 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Annealed - Reference heat treatment: softened - Forging stock - De ≤ 100 mm) | 3 | chevron_right |
| MSZ EN 3484 MSZ EN 3484 (Aerospace series - Steel X5CrNiCuNb16-4 (1.4549 type 1.4542) - As cast - Reference heat treatment: homogenised, solution treated, precipitation hardened and sub zero - Remelting stock) | 3 | chevron_right |
| MSZ EN 3486 MSZ EN 3486 (Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Solution annealed and precipitation hardened - 1400 ≤ Rm ≤ 1550 MPa - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| MSZ EN 3487 MSZ EN 3487 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Bars for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| MSZ EN 3488 MSZ EN 3488 (Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Sheets and strips - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa) | 3 | chevron_right |
| MSZ EN 3489 MSZ EN 3489 (Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 ≤ Rm ≤ 750 MPa - Tubes for structures - 0.5 ≤ a ≤ 5 mm) | 3 | chevron_right |
| MSZ EN 3490 MSZ EN 3490 (Aerospace series - Steel X15CrNi17-3 (1.4057) - Air melted - Hardened and tempered - Bars for machining - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 3 | chevron_right |
| MSZ EN 3491 MSZ EN 3491 (Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 2 | chevron_right |
| MSZ EN 3507 MSZ EN 3507 (Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 930 MPa ≤ Rm ≤ 1 080 MPa) | 2 | chevron_right |
| MSZ EN 3510 MSZ EN 3510 (Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm) | 2 | chevron_right |
| MSZ EN 3523 MSZ EN 3523 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Bars for machining - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa) | 3 | chevron_right |
| MSZ EN 3524 MSZ EN 3524 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mm ≤ a ≤ 6 mm - 1080 MPa ≤ Rm ≤ 1280 MPa) | 2 | chevron_right |
| MSZ EN 3525 MSZ EN 3525 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plates - 6 mm ≤ a ≤ 20 mm - 1080 MPa ≤ Rm ≤ 1280 MPa) | 2 | chevron_right |
| MSZ EN 3526 MSZ EN 3526 (Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1180 MPa) | 2 | chevron_right |
| MSZ EN 3527 MSZ EN 3527 (Aerospace series - Steel 33CrMoV12 (1.8522) - Air melted - Softened - Forging stock - a or D ≤ 300 mm) | 3 | chevron_right |
| MSZ EN 3528 MSZ EN 3528 (Aerospace series. Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 2 | chevron_right |
| MSZ EN 3529 MSZ EN 3529 (Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 2 | chevron_right |
| MSZ EN 3531 MSZ EN 3531 (Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 3 | chevron_right |
| MSZ EN 3532 MSZ EN 3532 (Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plates - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa) | 3 | chevron_right |
| MSZ EN 3552 MSZ EN 3552 (Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 3553 MSZ EN 3553 (Aerospace series - Aluminium alloy AL-P2618A - T6511 - Extruded bar and section - a or D ≤ 160 mm) | 1 | chevron_right |
| MSZ EN 3557 MSZ EN 3557 (Aerospace series - Aluminium alloy AL-P6061-T4 - Drawn tube for pressure applications - 0,6 mm ≤ a ≤ 3 mm) | 1 | chevron_right |
| MSZ EN 3638 MSZ EN 3638 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets, strips and plates - 0,5 ≤ a ≤ 10 mm) | 3 | chevron_right |
| MSZ EN 3639 MSZ EN 3639 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold worked - Wires for forged fasteners - D ≤ 15 mm - 900 MPa ≤ Rm ≤ 1 100 MPa) | 3 | chevron_right |
| MSZ EN 3666 MSZ EN 3666 (Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1550 MPa ≤ Rm ≤ 1830 MPa) | 1 | chevron_right |
| MSZ EN 3668 MSZ EN 3668 (Aerospace series. Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9). Non heat treated. Forging stock. a or D ≤ 250 mm) | 2 | chevron_right |
| MSZ EN 3671 MSZ EN 3671 (Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Non heat treated. Forging stock. a or D ≤ 250 mm) | 2 | chevron_right |
| MSZ EN 3677 MSZ EN 3677 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 310 MPa) | 3 | chevron_right |
| MSZ EN 3678 MSZ EN 3678 (Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 930 MPa) | 3 | chevron_right |
| MSZ EN 3697 MSZ EN 3697 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD) | 1 | chevron_right |
| MSZ EN 3698 MSZ EN 3698 (Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD) | 1 | chevron_right |
| MSZ EN 3761 MSZ EN 3761 (Aerospace series - Heat resisting alloy FE-PA2601 - Softened and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1100 MPa ≤ Rm ≤ 1300 MPa) | 1 | chevron_right |
| MSZ EN 3762 MSZ EN 3762 (Aerospace series - Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944) - Softened and cold worked - Wire for forged fasteners - D ≤ 15 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| MSZ EN 3813 MSZ EN 3813 (Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wire for forged fasteners. De ≤ 50 mm) | 2 | chevron_right |
| MSZ EN 3816 MSZ EN 3816 (Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened and cold rolled - Sheet and strip a ≤ 3 mm - Rm ≥ 800 MPa) | 2 | chevron_right |
| MSZ EN 3825 MSZ EN 3825 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD) | 1 | chevron_right |
| MSZ EN 3826 MSZ EN 3826 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD) | 1 | chevron_right |
| MSZ EN 3827 MSZ EN 3827 (Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD) | 1 | chevron_right |
| MSZ EN 3872 MSZ EN 3872 (Aerospace series - Aluminium alloy AL-R39002-H112 - Die forgings - a ≤ 200 mm) | 1 | chevron_right |
| MSZ EN 3882 MSZ EN 3882 (Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding) | 2 | chevron_right |
| MSZ EN 3883 MSZ EN 3883 (Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding) | 2 | chevron_right |
| MSZ EN 3884 MSZ EN 3884 (Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding) | 2 | chevron_right |
| MSZ EN 3885 MSZ EN 3885 (Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding) | 2 | chevron_right |
| MSZ EN 3886 MSZ EN 3886 (Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding) | 2 | chevron_right |
| MSZ EN 3887 MSZ EN 3887 (Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding) | 2 | chevron_right |
| MSZ EN 3888 MSZ EN 3888 (Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding) | 2 | chevron_right |
| MSZ EN 3889 MSZ EN 3889 (Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding) | 2 | chevron_right |
| MSZ EN 3890 MSZ EN 3890 (Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding) | 2 | chevron_right |
| MSZ EN 3892 MSZ EN 3892 (Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding) | 1 | chevron_right |
| MSZ EN 3893 MSZ EN 3893 (Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding) | 1 | chevron_right |
| MSZ EN 3894 MSZ EN 3894 (Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding) | 2 | chevron_right |
| MSZ EN 3895 MSZ EN 3895 (Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding) | 2 | chevron_right |
| MSZ EN 3896 MSZ EN 3896 (Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for welding) | 2 | chevron_right |
| MSZ EN 3897 MSZ EN 3897 (Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding) | 2 | chevron_right |
| MSZ EN 39 MSZ EN 39 (Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions) | 2 | chevron_right |
| MSZ EN 3917 MSZ EN 3917 (Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3918 MSZ EN 3918 (Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Tape) | 2 | chevron_right |
| MSZ EN 3919 MSZ EN 3919 (Aerospace series - Nickel base alloy NI-B41202 (NiCr14Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| MSZ EN 3920 MSZ EN 3920 (Aerospace series - Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3921 MSZ EN 3921 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| MSZ EN 3922 MSZ EN 3922 (Aerospace series - Nickel base alloy Ni-B41203 (NiCr7Si5B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| MSZ EN 3923 MSZ EN 3923 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3924 MSZ EN 3924 (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| MSZ EN 3925 MSZ EN 3925 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| MSZ EN 3926 MSZ EN 3926 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| MSZ EN 3927 MSZ EN 3927 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3928 MSZ EN 3928 (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| MSZ EN 3930 MSZ EN 3930 (Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3931 MSZ EN 3931 (Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Tape) | 2 | chevron_right |
| MSZ EN 3932 MSZ EN 3932 (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| MSZ EN 3933 MSZ EN 3933 (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3934 MSZ EN 3934 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| MSZ EN 3935 MSZ EN 3935 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| MSZ EN 3936 MSZ EN 3936 (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3937 MSZ EN 3937 (Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3938 MSZ EN 3938 (Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| MSZ EN 3939 MSZ EN 3939 (Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3940 MSZ EN 3940 (Aerospace series - Nickel base alloy NI-B46001 (NiCoSi5B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| MSZ EN 3941 MSZ EN 3941 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| MSZ EN 3942 MSZ EN 3942 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| MSZ EN 3943 MSZ EN 3943 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3944 MSZ EN 3944 (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Tape) | 2 | chevron_right |
| MSZ EN 3945 MSZ EN 3945 (Aerospace series - Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3946 MSZ EN 3946 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3947 MSZ EN 3947 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| MSZ EN 3948 MSZ EN 3948 (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Wire) | 2 | chevron_right |
| MSZ EN 3952 MSZ EN 3952 (Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing - Wire) | 2 | chevron_right |
| MSZ EN 3953 MSZ EN 3953 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Wire) | 2 | chevron_right |
| MSZ EN 3954 MSZ EN 3954 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3955 MSZ EN 3955 (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| MSZ EN 3956 MSZ EN 3956 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Wire) | 2 | chevron_right |
| MSZ EN 3957 MSZ EN 3957 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3958 MSZ EN 3958 (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| MSZ EN 3959 MSZ EN 3959 (Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3960 MSZ EN 3960 (Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing - Powder or paste) | 2 | chevron_right |
| MSZ EN 3961 MSZ EN 3961 (Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Rolled foil) | 2 | chevron_right |
| MSZ EN 3962 MSZ EN 3962 (Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire) | 2 | chevron_right |
| MSZ EN 3963 MSZ EN 3963 (Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Rolled foil) | 1 | chevron_right |
| MSZ EN 3964 MSZ EN 3964 (Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Wire) | 1 | chevron_right |
| MSZ EN 3965 MSZ EN 3965 (Aerospace series - Titanium alloy TI-B17001 - Filler metal for brazing - Rolled foil) | 1 | chevron_right |
| MSZ EN 3969 MSZ EN 3969 (Aerospace series. Steel FE-PL1507 (40CrMoV12). Air melted. Annealed. Forging stock. a or D ≤ 350 mm) | 2 | chevron_right |
| MSZ EN 3971 MSZ EN 3971 (Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Annealed - Forging stock - a or D ≤ 350 mm) | 2 | chevron_right |
| MSZ EN 3972 MSZ EN 3972 (Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa) | 2 | chevron_right |
| MSZ EN 3973 MSZ EN 3973 (Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De ≤ 50 mm - Rm ≥ 1 030 MPa) | 2 | chevron_right |
| MSZ EN 3979 MSZ EN 3979 (Aerospace series - Aluminium alloy AL-P8090-O2 - Sheet for superplastic forming (SPF) - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 3982 MSZ EN 3982 (Aerospace series - Aluminium alloy AL-P7050 - AlZn6CuMgZr - T7451 - Plates - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| MSZ EN 3983 MSZ EN 3983 (Aerospace series - Aluminium alloy AL-P7050- - T7651 - Plate - 6 mm < a ≤ 160 mm) | 1 | chevron_right |
| MSZ EN 3997 MSZ EN 3997 (Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T3 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 3998 MSZ EN 3998 (Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 3999 MSZ EN 3999 (Aerospace series - Aluminium alloy AL-P2024-T351 - Sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4001 MSZ EN 4001 (Aerospace series - Aluminium alloy AL-P2024-T351 - Clad sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4002 MSZ EN 4002 (Aerospace series. Aluminium alloy AL-P2219-T81. Sheet and strip 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4003 MSZ EN 4003 (Aerospace series - Aluminium alloy AL-P2219-T87 - Sheet and strip 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4004 MSZ EN 4004 (Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4005 MSZ EN 4005 (Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4006 MSZ EN 4006 (Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4007 MSZ EN 4007 (Aerospace series - Aluminium alloy AL-P6082-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4085 MSZ EN 4085 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| MSZ EN 4098 MSZ EN 4098 (Aerospace series - Steel 40CrMoV12 (1.8523) - Consumable electrode remelted - Hardened and tempered - Forgings - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa) | 3 | chevron_right |
| MSZ EN 4099 MSZ EN 4099 (Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Clad sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4100 MSZ EN 4100 (Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4101 MSZ EN 4101 (Aerospace series - Aluminium alloy AL-P2024-T4 - Sheet and strip with improved stretch forming capability - 0,4 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4102 MSZ EN 4102 (Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4103 MSZ EN 4103 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Borided foil) | 2 | chevron_right |
| MSZ EN 4104 MSZ EN 4104 (Aerospace series - Nickel base alloy NI-B40002 - Filler metal for brazing - Powder or paste) | 1 | chevron_right |
| MSZ EN 4105 MSZ EN 4105 (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Tape) | 2 | chevron_right |
| MSZ EN 4202 MSZ EN 4202 (Aerospace series - Aluminium alloy AL-P6082-T651 - Plate - 6 mm < a ≤ 25 mm) | 1 | chevron_right |
| MSZ EN 4203 MSZ EN 4203 (Aerospace series - Aluminium alloy AL-P8090-T89 - Sheet - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4204 MSZ EN 4204 (Aerospace series - Aluminium alloy AL-P8090 - T841 - Sheet - 0,6 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4209 MSZ EN 4209 (Aerospace series - Aluminium alloy AL-P2219-T851 - Plate - 6 mm < a ≤ 50 mm) | 1 | chevron_right |
| MSZ EN 4211 MSZ EN 4211 (Aerospace series - Aluminium alloy AL-P2024-T42 - Clad plate - 6 mm < a ≤ 25 mm) | 1 | chevron_right |
| MSZ EN 4212 MSZ EN 4212 (Aerospace series - Aluminium alloy AL-P5086-H111 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| MSZ EN 4213 MSZ EN 4213 (Aerospace series - Aluminium alloy AL-P6061-T651 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| MSZ EN 4214 MSZ EN 4214 (Aerospace series - Aluminium alloy AL-P7010-T651 - Plate - 6 mm < a ≤ 20 mm) | 1 | chevron_right |
| MSZ EN 4215 MSZ EN 4215 (Aerospace series - Aluminium alloy AL-P7175-T651 - Plate - 6 mm < a ≤ 80 mm) | 1 | chevron_right |
| MSZ EN 4216 MSZ EN 4216 (Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa) | 2 | chevron_right |
| MSZ EN 4244 MSZ EN 4244 (Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bars - a or D 200 mm - 1 000 MPa Rm 1 140 MPa) | 1 | chevron_right |
| MSZ EN 4245 MSZ EN 4245 (Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - As forged - Forging stock - De 300 mm) | 1 | chevron_right |
| MSZ EN 4247 MSZ EN 4247 (Aerospace series - Aluminium alloy AL-P2024-T42 - Plate - 6 mm < a ≤ 140 mm) | 1 | chevron_right |
| MSZ EN 4250 MSZ EN 4250 (Aerospace series - Nickel base alloys NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil) | 2 | chevron_right |
| MSZ EN 4262 MSZ EN 4262 (Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 880 MPa) | 2 | chevron_right |
| MSZ EN 4263 MSZ EN 4263 (Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960 MPa) | 2 | chevron_right |
| MSZ EN 4264 MSZ EN 4264 (Aerospace series - Heat resisting alloy X4NiCrMoTi43-13 - As forged - Forging stock - a or D ≤ 200 mm) | 2 | chevron_right |
| MSZ EN 4283 MSZ EN 4283 (Aerospace series - Aluminium alloy AL-P2219-T87 - Plate - 6 mm < a ≤ 40 mm) | 1 | chevron_right |
| MSZ EN 4286 MSZ EN 4286 (Aerospace series - Aluminium alloy AL-P8090-T89 - Die forgings - a ≤ 125 mm) | 1 | chevron_right |
| MSZ EN 4287 MSZ EN 4287 (Aerospace series - Aluminium alloy AL-P7010 - Forging stock) | 1 | chevron_right |
| MSZ EN 4289 MSZ EN 4289 (Aerospace series - Aluminium alloy AL-P7175- Forging stock) | 1 | chevron_right |
| MSZ EN 4291 MSZ EN 4291 (Aerospace series - Aluminium alloy AL-P8090 - Forging stock) | 1 | chevron_right |
| MSZ EN 4292 MSZ EN 4292 (Aerospace series - Aluminium alloy AL-R39002 - Forging stock) | 1 | chevron_right |
| MSZ EN 4293 MSZ EN 4293 (Aerospce series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D ≤ 150 mm) | 1 | chevron_right |
| MSZ EN 4313 MSZ EN 4313 (Aerospace series - Aluminium alloy AL-P6013-T6 - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4314 MSZ EN 4314 (Aerospace series - Heat-resisting alloy X4NiCrTiMoV26-15 (1.4680) - Consumable electrode remelted - Not heat treated - Forging stock - a or D ≤ 250 mm) | 3 | chevron_right |
| MSZ EN 4315 MSZ EN 4315 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Bars and sections - a or D ≤ 100 mm - Rm ≥ 900 MPa) | 3 | chevron_right |
| MSZ EN 4317 MSZ EN 4317 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Not heat treated - Forging stock - a or D ≤ 200 mm) | 3 | chevron_right |
| MSZ EN 4318 MSZ EN 4318 (Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm - Rm ≥ 960 MPa) | 3 | chevron_right |
| MSZ EN 4324 MSZ EN 4324 (Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod) | 1 | chevron_right |
| MSZ EN 4325 MSZ EN 4325 (Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4326 MSZ EN 4326 (Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4327 MSZ EN 4327 (Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4328 MSZ EN 4328 (Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4329 MSZ EN 4329 (Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4330 MSZ EN 4330 (Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4331 MSZ EN 4331 (Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4332 MSZ EN 4332 (Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4333 MSZ EN 4333 (Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4334 MSZ EN 4334 (Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4335 MSZ EN 4335 (Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4336 MSZ EN 4336 (Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4337 MSZ EN 4337 (Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn3) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4338 MSZ EN 4338 (Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4339 MSZ EN 4339 (Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4340 MSZ EN 4340 (Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| MSZ EN 4341 MSZ EN 4341 (Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| MSZ EN 4342 MSZ EN 4342 (Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod) | 1 | chevron_right |
| MSZ EN 4343 MSZ EN 4343 (Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4344 MSZ EN 4344 (Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4346 MSZ EN 4346 (Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted, softended, forging stock a or D ≤ 300 mm) | 2 | chevron_right |
| MSZ EN 4347 MSZ EN 4347 (Aerospace series Steel FE-PM1506 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm) | 2 | chevron_right |
| MSZ EN 4372 MSZ EN 4372 (Aerospace series - Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) - Wire for solid rivets - D ≤ 10 mm) | 2 | chevron_right |
| MSZ EN 4373 MSZ EN 4373 (Aerospace series. Heat resisting alloy NI-PD9001 (NiCu31). Annealed, seamless tube D ≤ 75 mm, a ≤ 3 mm) | 2 | chevron_right |
| MSZ EN 4374 MSZ EN 4374 (Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - De ≤ 200 mm) | 2 | chevron_right |
| MSZ EN 4376 MSZ EN 4376 (Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated - Bar and section, De ≤ 200 mm) | 2 | chevron_right |
| MSZ EN 4377 MSZ EN 4377 (Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) - Non heat treated - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| MSZ EN 4379 MSZ EN 4379 (Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging De ≤ 200 mm) | 2 | chevron_right |
| MSZ EN 4382 MSZ EN 4382 (Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated. Seamless tubes. For hydraulic application. D ≤ 50 mm, a ≤ 3 mm) | 2 | chevron_right |
| MSZ EN 4383 MSZ EN 4383 (Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock) | 2 | chevron_right |
| MSZ EN 4384 MSZ EN 4384 (Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock) | 2 | chevron_right |
| MSZ EN 440 MSZ EN 440 (Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification) | 10 | chevron_right |
| MSZ EN 4449 MSZ EN 4449 (Aerospace series - Aluminium alloy AL-P7050 - T76 - Sheet - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4450 MSZ EN 4450 (Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm ≤ a ≤ 6 mm) | 1 | chevron_right |
| MSZ EN 4461 MSZ EN 4461 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 200 MPa) | 2 | chevron_right |
| MSZ EN 4462 MSZ EN 4462 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa) | 2 | chevron_right |
| MSZ EN 4463 MSZ EN 4463 (Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| MSZ EN 4464 MSZ EN 4464 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 200 MPa) | 2 | chevron_right |
| MSZ EN 4465 MSZ EN 4465 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 300 MPa) | 2 | chevron_right |
| MSZ EN 4466 MSZ EN 4466 (Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 400 MPa) | 2 | chevron_right |
| MSZ EN 4467 MSZ EN 4467 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa) | 2 | chevron_right |
| MSZ EN 4468 MSZ EN 4468 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1300 MPa) | 2 | chevron_right |
| MSZ EN 4469 MSZ EN 4469 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| MSZ EN 4470 MSZ EN 4470 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1200 MPa) | 2 | chevron_right |
| MSZ EN 4471 MSZ EN 4471 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1300 MPa) | 2 | chevron_right |
| MSZ EN 4472 MSZ EN 4472 (Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| MSZ EN 4528 MSZ EN 4528 (Aerospace series. Steel FE-PA 3903 (X10CrNi18-8) - Cold rolled - Strip for springs. a ≤ 3 mm. 1250 MPa ≤ Rm ≤ 1640 MPa) | 2 | chevron_right |
| MSZ EN 4566 MSZ EN 4566 (Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) - Vacuum melted - Solution treated - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| MSZ EN 4570 MSZ EN 4570 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 Solution treated Forgings De ≤ 100 mm) | 2 | chevron_right |
| MSZ EN 4571 MSZ EN 4571 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Bars and sections - De = 100 mm) | 2 | chevron_right |
| MSZ EN 4572 MSZ EN 4572 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Sheets and strips - a ≤ 3 mm) | 2 | chevron_right |
| MSZ EN 4573 MSZ EN 4573 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Bars and sections - De ≤ 100 mm) | 2 | chevron_right |
| MSZ EN 4574 MSZ EN 4574 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Forgings - De ≤ 100 mm) | 2 | chevron_right |
| MSZ EN 4575 MSZ EN 4575 (Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and descaled - Sheets and plates - 3 mm < a ≤ 50 mm) | 2 | chevron_right |
| MSZ EN 4615 MSZ EN 4615 (Aerospace series - Magnesium alloy MG-C18002 - T4 - Sand casting) | 1 | chevron_right |
| MSZ EN 4616 MSZ EN 4616 (Aerospace series - Magnesium alloy MG-C18002 - T4 - Chill casting) | 1 | chevron_right |
| MSZ EN 4627 MSZ EN 4627 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 3 | chevron_right |
| MSZ EN 4628 MSZ EN 4628 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| MSZ EN 4629 MSZ EN 4629 (Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - De ≤ 300 mm) | 2 | chevron_right |
| MSZ EN 4630 MSZ EN 4630 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 3 | chevron_right |
| MSZ EN 4631 MSZ EN 4631 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 3 | chevron_right |
| MSZ EN 4642 MSZ EN 4642 (Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Sheet and plate - 0,6 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 2 | chevron_right |
| MSZ EN 4655 MSZ EN 4655 (Aerospace series. Steel FEPM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D ≤ 200 mm. Rm ≥ 1400 MPa) | 2 | chevron_right |
| MSZ EN 4656 MSZ EN 4656 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D ≤ 200 mm - Rm ≥ 1520 MPa) | 2 | chevron_right |
| MSZ EN 4657 MSZ EN 4657 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation remelted - Bars - a or D < 200 mm - Rm > 1 650 MPa) | 2 | chevron_right |
| MSZ EN 4658 MSZ EN 4658 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 520 MPa) | 2 | chevron_right |
| MSZ EN 4659 MSZ EN 4659 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 650 Mpa) | 2 | chevron_right |
| MSZ EN 4670 MSZ EN 4670 (Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| MSZ EN 4671 MSZ EN 4671 (Aerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1400 MPa) | 2 | chevron_right |
| MSZ EN 4672 MSZ EN 4672 (Aerospace series - Steel FE-PM1504 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm) | 2 | chevron_right |
| MSZ EN 4675 MSZ EN 4675 (Aerospace series - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm ≥ 1 300 MPa - Bars - De < 110 mm) | 2 | chevron_right |
| MSZ EN 4683 MSZ EN 4683 (Aerospace series - Steel FE-WM 3504 (X4CrNiMo16-5-1) - Air melted - Filler metal for welding - Wire and rod) | 2 | chevron_right |
| MSZ EN 4685 MSZ EN 4685 (Aerospace series - Titanium Ti10V2Fe3Al - Bars - D < 110 mm - Rm ≥ 1 240 MPa) | 1 | chevron_right |
| MSZ EN 4720 MSZ EN 4720 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa) | 2 | chevron_right |
| MSZ EN 4721 MSZ EN 4721 (Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted and electroslag remelted (ESR) - Hardened and tempered - Bar - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 050 MPa) | 2 | chevron_right |
| MSZ EN 4725 MSZ EN 4725 (Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T351 - Plate - 6 mm < a ≤ 150 mm) | 1 | chevron_right |
| MSZ EN 4825 MSZ EN 4825 (Aerospace series - Steel X12CrNiMoV12-3 (1.4938) - Air melted and consumable electrode remelted - Hardened and tempered - Bars - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1100 MPa) | 2 | chevron_right |
| MSZ EN 4842 MSZ EN 4842 (Aerospace series - X5CrNiCu15-5 (1.4545)- Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bars for machining, a or D ≤ 250 mm, 1 070 MPa ≤ Rm ≤ 1 200 MPa - Premium quality (pq)) | 2 | chevron_right |
| MSZ EN 485-2 MSZ EN 485-2 (Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties) | 110 | chevron_right |
| MSZ EN 486 MSZ EN 486 (Aluminium and aluminium alloys - Extrusion ingots - Specifications) | 444 | chevron_right |
| MSZ EN 487 MSZ EN 487 (Aluminium and aluminium alloys - Rolling ingots - Specifications) | 184 | chevron_right |
| MSZ EN 4882 MSZ EN 4882 (Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 1 070 MPa) | 2 | chevron_right |
| MSZ EN 4883 MSZ EN 4883 (Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Plates - 6 mm ≤ a ≤ 100 mm - Rm ≥ 1 070 MPa) | 2 | chevron_right |
| MSZ EN 4884 MSZ EN 4884 (Aerospace series - Steel X3CrNiMoAl (1.4534) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D ≤ 200 mm - 1 200 MPa ≤ Rm ≤ 1 350 MPa) | 2 | chevron_right |
| MSZ EN 4890 MSZ EN 4890 (Aerospace series - Steel X4CrNiMo16-5-1 - Air melted - Hardened and tempered - Sheets and plates - 0,3 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1050 MPa) | 1 | chevron_right |
| MSZ EN 4900 MSZ EN 4900 (Aerospace series - Aluminium alloy 5086 - H111 - Extruded bars - 10 mm ≤ D ≤ 300 mm) | 1 | chevron_right |
| MSZ EN 4904 MSZ EN 4904 (Aerospace series - Steel 36NiCrMo16 (1.6773) - 1 000 MPa ≤ Rm ≤ 1 200 MPa - Bars - 100 mm ≤ D ≤ 250 mm) | 2 | chevron_right |
| MSZ EN 499 MSZ EN 499 (Welding consumables - Covered electrodes for manual metal arc welding of non alloy and fine grain steels) | 7 | chevron_right |
| MSZ EN 50149 MSZ EN 50149 (Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires) | 20 | chevron_right |
| MSZ EN 50183 MSZ EN 50183 (Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires) | 6 | chevron_right |
| MSZ EN 50189 MSZ EN 50189 (Conductors for overhead lines. Zinc coated steel wires) | 6 | chevron_right |
| MSZ EN 50307 MSZ EN 50307 (Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables) | 23 | chevron_right |
| MSZ EN 541 MSZ EN 541 (Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications) | 22 | chevron_right |
| MSZ EN 546-2 MSZ EN 546-2 (Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties) | 22 | chevron_right |
| MSZ EN 549 MSZ EN 549 (Rubber materials for seals and diaphragms for gas appliances and gas equipment) | 60 | chevron_right |
| MSZ EN 570 MSZ EN 570 (Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification) | 47 | chevron_right |
| MSZ EN 573-3 MSZ EN 573-3 (Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products) | 454 | chevron_right |
| MSZ EN 575 MSZ EN 575 (Aluminium and aluminium alloys - Master alloys produced by melting - Specifications) | 100 | chevron_right |
| MSZ EN 576 MSZ EN 576 (Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications) | 54 | chevron_right |
| MSZ EN 586-2 MSZ EN 586-2 (Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements) | 12 | chevron_right |
| MSZ EN 601 MSZ EN 601 (Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff) | 1 | chevron_right |
| MSZ EN 602 MSZ EN 602 (Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff) | 1 | chevron_right |
| MSZ EN 603-2 MSZ EN 603-2 (Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties) | 18 | chevron_right |
| MSZ EN 60454-3-1 MSZ EN 60454-3-1 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3-1: Specifications for individual materials - PVC film tapes with pressure-sensitive adhesive) | 12 | chevron_right |
| MSZ EN 60454-3-11 MSZ EN 60454-3-11 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives) | 13 | chevron_right |
| MSZ EN 60454-3-12 MSZ EN 60454-3-12 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive) | 9 | chevron_right |
| MSZ EN 60454-3-14 MSZ EN 60454-3-14 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive) | 5 | chevron_right |
| MSZ EN 60454-3-19 MSZ EN 60454-3-19 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides) | 4 | chevron_right |
| MSZ EN 60454-3-2 MSZ EN 60454-3-2 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives) | 8 | chevron_right |
| MSZ EN 60454-3-4 MSZ EN 60454-3-4 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive) | 2 | chevron_right |
| MSZ EN 60454-3-7 MSZ EN 60454-3-7 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive) | 4 | chevron_right |
| MSZ EN 60454-3-8 MSZ EN 60454-3-8 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fiber) | 5 | chevron_right |
| MSZ EN 60672-3 MSZ EN 60672-3 (Ceramic and glass-insulating materials - Part 3: Specifications for individual materials) | 54 | chevron_right |
| MSZ EN 60674-3-1 MSZ EN 60674-3-1 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors) | 12 | chevron_right |
| MSZ EN 60674-3-4 to 6 MSZ EN 60674-3-4 to 6 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation) | 12 | chevron_right |
| MSZ EN 60674-3-7 MSZ EN 60674-3-7 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation) | 3 | chevron_right |
| MSZ EN 60674-3-8 MSZ EN 60674-3-8 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation) | 3 | chevron_right |
| MSZ EN 60893-3-2 MSZ EN 60893-3-2 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins) | 20 | chevron_right |
| MSZ EN 60893-3-3 MSZ EN 60893-3-3 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (IEC 606893-3-3)) | 2 | chevron_right |
| MSZ EN 60893-3-4 MSZ EN 60893-3-4 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4)) | 18 | chevron_right |
| MSZ EN 60893-3-5 MSZ EN 60893-3-5 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins) | 5 | chevron_right |
| MSZ EN 60893-3-6 MSZ EN 60893-3-6 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins) | 2 | chevron_right |
| MSZ EN 60893-3-7 MSZ EN 60893-3-7 (Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimid resins) | 1 | chevron_right |
| MSZ EN 610 MSZ EN 610 (Tin and tin alloys - Ingot tin) | 5 | chevron_right |
| MSZ EN 611-1 MSZ EN 611-1 (Tin and tin alloys - Pewter and pewterware - Part 1: Pewter) | 6 | chevron_right |
| MSZ EN 611-2 MSZ EN 611-2 (Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware) | 3 | chevron_right |
| MSZ EN 61212-3-1 MSZ EN 61212-3-1 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes) | 15 | chevron_right |
| MSZ EN 61212-3-2 MSZ EN 61212-3-2 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated molded tubes) | 6 | chevron_right |
| MSZ EN 61212-3-3 MSZ EN 61212-3-3 (Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated molded rods) | 11 | chevron_right |
| MSZ EN 61249-2-1 MSZ EN 61249-2-1 (Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad) | 3 | chevron_right |
| MSZ EN 61249-2-10 MSZ EN 61249-2-10 (Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| MSZ EN 61249-2-11 MSZ EN 61249-2-11 (Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| MSZ EN 61249-2-2 MSZ EN 61249-2-2 (Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad) | 4 | chevron_right |
| MSZ EN 61249-2-21 MSZ EN 61249-2-21 (Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| MSZ EN 61249-2-22 MSZ EN 61249-2-22 (Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| MSZ EN 61249-2-23 MSZ EN 61249-2-23 (Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad) | 3 | chevron_right |
| MSZ EN 61249-2-26 MSZ EN 61249-2-26 (Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| MSZ EN 61249-2-27 MSZ EN 61249-2-27 (Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad - Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| MSZ EN 61249-2-30 MSZ EN 61249-2-30 (Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| MSZ EN 61249-2-35 MSZ EN 61249-2-35 (Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| MSZ EN 61249-2-36 MSZ EN 61249-2-36 (Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| MSZ EN 61249-2-37 MSZ EN 61249-2-37 (Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| MSZ EN 61249-2-38 MSZ EN 61249-2-38 (Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| MSZ EN 61249-2-39 MSZ EN 61249-2-39 (Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| MSZ EN 61249-2-40 MSZ EN 61249-2-40 (Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 1 | chevron_right |
| MSZ EN 61249-2-41 MSZ EN 61249-2-41 (Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| MSZ EN 61249-2-42 MSZ EN 61249-2-42 (Materials for printed boards and other interconnecting structures - Part 2-42: Reinforced base materials clad and unclad - Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| MSZ EN 61249-2-43 MSZ EN 61249-2-43 (Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| MSZ EN 61249-2-44 MSZ EN 61249-2-44 (Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| MSZ EN 61249-2-5 MSZ EN 61249-2-5 (Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core / woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| MSZ EN 61249-2-6 MSZ EN 61249-2-6 (Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| MSZ EN 61249-2-8 MSZ EN 61249-2-8 (Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| MSZ EN 61249-2-9 MSZ EN 61249-2-9 (Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad) | 2 | chevron_right |
| MSZ EN 622-2 MSZ EN 622-2 (Fibreboards - Specifications - Part 2: Requirements for hardboards) | 6 | chevron_right |
| MSZ EN 622-3 MSZ EN 622-3 (Fibreboards - Specifications - Part 3: Requirements for medium boards) | 10 | chevron_right |
| MSZ EN 622-4 MSZ EN 622-4 (Fibreboards - Specifications - Part 4: Requirements for softboards) | 5 | chevron_right |
| MSZ EN 622-5 MSZ EN 622-5 (Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)) | 9 | chevron_right |
| MSZ EN 683-2 MSZ EN 683-2 (Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties) | 26 | chevron_right |
| MSZ EN 754-2 MSZ EN 754-2 (Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties) | 100 | chevron_right |
| MSZ EN 755-2 MSZ EN 755-2 (Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties) | 140 | chevron_right |
| MSZ EN 756 MSZ EN 756 (Welding consumables - Solid wire, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels) | 34 | chevron_right |
| MSZ EN 757 MSZ EN 757 (Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification) | 9 | chevron_right |
| MSZ EN 758 MSZ EN 758 (Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels) | 8 | chevron_right |
| MSZ EN 988 MSZ EN 988 (Zinc and zinc alloys - Specifications for rolled flat products for building) | 1 | chevron_right |
| MSZ EN IEC 60674-3-2 MSZ EN IEC 60674-3-2 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation) | 5 | chevron_right |
| MSZ EN IEC 60674-3-3 MSZ EN IEC 60674-3-3 (Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation) | 6 | chevron_right |
| MSZ EN IEC 60674-3-4 MSZ EN IEC 60674-3-4 (Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4: Polyimide films used for electrical insulation) | 7 | chevron_right |
| MSZ EN IEC 61249-2-45 MSZ EN IEC 61249-2-45 (Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| MSZ EN IEC 61249-2-46 MSZ EN IEC 61249-2-46 (Materials for printed boards and other interconnecting structures - Part 2-46: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| MSZ EN IEC 61249-2-47 MSZ EN IEC 61249-2-47 (Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2.0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly) | 2 | chevron_right |
| MSZ EN ISO 10081-1 MSZ EN ISO 10081-1 (Classification of dense shaped refractory products - Part 1: Alumina-silica (ISO 10081-1:2003)) | 13 | chevron_right |
| MSZ EN ISO 10081-2 MSZ EN ISO 10081-2 (Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon (ISO 10081-2:2003)) | 36 | chevron_right |
| MSZ EN ISO 10081-3 MSZ EN ISO 10081-3 (Classification of dense shaped refractory products - Part 3: Basic products containing from 7% to 50% residual carbon (ISO 10081-3:2003)) | 96 | chevron_right |
| MSZ EN ISO 10081-4 MSZ EN ISO 10081-4 (Classification of dense shaped refractory products - Part 4: Special products (ISO 10081-4:2014)) | 175 | chevron_right |
| MSZ EN ISO 10366-1 MSZ EN ISO 10366-1 (Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 10366-1:2002)) | 11 | chevron_right |
| MSZ EN ISO 1071 MSZ EN ISO 1071 (Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification) | 41 | chevron_right |
| MSZ EN ISO 11542-1 MSZ EN ISO 11542-1 (Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001)) | 9 | chevron_right |
| MSZ EN ISO 1163-1 MSZ EN ISO 1163-1 (Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995)) | 24 | chevron_right |
| MSZ EN ISO 11833-1 MSZ EN ISO 11833-1 (Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)) | 24 | chevron_right |
| MSZ EN ISO 11833-2 MSZ EN ISO 11833-2 (Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)) | 7 | chevron_right |
| MSZ EN ISO 11960 MSZ EN ISO 11960 (Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells) | 24 | chevron_right |
| MSZ EN ISO 11961 MSZ EN ISO 11961 (Petroleum and natural gas industries - Steel drill pipe) | 16 | chevron_right |
| MSZ EN ISO 11963 MSZ EN ISO 11963 (Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2019)) | 14 | chevron_right |
| MSZ EN ISO 12153 MSZ EN ISO 12153 (Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys - Classification) | 21 | chevron_right |
| MSZ EN ISO 12683 MSZ EN ISO 12683 (Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004)) | 27 | chevron_right |
| MSZ EN ISO 13085 MSZ EN ISO 13085 (Petroleum and natural gas industries - Aluminium alloy pipe for use as tubing for wells (ISO 13085:2014)) | 4 | chevron_right |
| MSZ EN ISO 13356 MSZ EN ISO 13356 (Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) (ISO 13356:2015)) | 1 | chevron_right |
| MSZ EN ISO 13680 MSZ EN ISO 13680 (Oil and gas industries including lower carbon energy - Corrosion - resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material -Technical delivery conditions) | 101 | chevron_right |
| MSZ EN ISO 14172 MSZ EN ISO 14172 (Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015)) | 51 | chevron_right |
| MSZ EN ISO 14343 MSZ EN ISO 14343 (Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification) | 125 | chevron_right |
| MSZ EN ISO 1456 MSZ EN ISO 1456 (Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium) | 382 | chevron_right |
| MSZ EN ISO 14631 MSZ EN ISO 14631 (Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:2021)) | 3 | chevron_right |
| MSZ EN ISO 14632 MSZ EN ISO 14632 (Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:2021)) | 4 | chevron_right |
| MSZ EN ISO 15013 MSZ EN ISO 15013 (Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods (ISO 15013:2007)) | 7 | chevron_right |
| MSZ EN ISO 15015 MSZ EN ISO 15015 (Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)) | 4 | chevron_right |
| MSZ EN ISO 15527 MSZ EN ISO 15527 (Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2018)) | 4 | chevron_right |
| MSZ EN ISO 15546 MSZ EN ISO 15546 (Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2011)) | 4 | chevron_right |
| MSZ EN ISO 16120-2 MSZ EN ISO 16120-2 (Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-purpose wire rod) | 60 | chevron_right |
| MSZ EN ISO 16120-3 MSZ EN ISO 16120-3 (Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod) | 6 | chevron_right |
| MSZ EN ISO 16120-4 MSZ EN ISO 16120-4 (Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications) | 68 | chevron_right |
| MSZ EN ISO 1622-1 MSZ EN ISO 1622-1 (Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1622-1:2012)) | 7 | chevron_right |
| MSZ EN ISO 16834 MSZ EN ISO 16834 (Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)) | 47 | chevron_right |
| MSZ EN ISO 17633 MSZ EN ISO 17633 (Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2025)) | 94 | chevron_right |
| MSZ EN ISO 17634 MSZ EN ISO 17634 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015)) | 23 | chevron_right |
| MSZ EN ISO 17672 MSZ EN ISO 17672 (Brazing - Filler metals) | 148 | chevron_right |
| MSZ EN ISO 17777 MSZ EN ISO 17777 (Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification) | 46 | chevron_right |
| MSZ EN ISO 18273 MSZ EN ISO 18273 (Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification) | 70 | chevron_right |
| MSZ EN ISO 18274 MSZ EN ISO 18274 (Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification) | 74 | chevron_right |
| MSZ EN ISO 18276 MSZ EN ISO 18276 (Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification (ISO 18276:2017)) | 28 | chevron_right |
| MSZ EN ISO 1872-1 MSZ EN ISO 1872-1 (Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1872-1:1993)) | 59 | chevron_right |
| MSZ EN ISO 1873-1 MSZ EN ISO 1873-1 (Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995)) | 18 | chevron_right |
| MSZ EN ISO 1874-1 MSZ EN ISO 1874-1 (Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specification (ISO 1874-1:2010)) | 522 | chevron_right |
| MSZ EN ISO 19288 MSZ EN ISO 19288 (Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification) | 28 | chevron_right |
| MSZ EN ISO 19598 MSZ EN ISO 19598 (Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment) | 19 | chevron_right |
| MSZ EN ISO 20378 MSZ EN ISO 20378 (Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification) | 10 | chevron_right |
| MSZ EN ISO 2081 MSZ EN ISO 2081 (Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel) | 18 | chevron_right |
| MSZ EN ISO 2082 MSZ EN ISO 2082 (Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017)) | 18 | chevron_right |
| MSZ EN ISO 21305-1 MSZ EN ISO 21305-1 (Plastics - Polycarbonate (PC) molding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21305-1:2019)) | 7 | chevron_right |
| MSZ EN ISO 2179 MSZ EN ISO 2179 (Electroplated coatings of tin-nickel alloy - Specification and test methods (ISO 2179:1986)) | 4 | chevron_right |
| MSZ EN ISO 22068 MSZ EN ISO 22068 (Sintered-metal injection-moulded materials - Specifications) | 36 | chevron_right |
| MSZ EN ISO 24023-1 MSZ EN ISO 24023-1 (Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials, Part 1: Designation system and basis for specifications) | 2 | chevron_right |
| MSZ EN ISO 24034 MSZ EN ISO 24034 (Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification) | 72 | chevron_right |
| MSZ EN ISO 24373 MSZ EN ISO 24373 (Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification) | 56 | chevron_right |
| MSZ EN ISO 2560 MSZ EN ISO 2560 (Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification) | 96 | chevron_right |
| MSZ EN ISO 2580-1 MSZ EN ISO 2580-1 (Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2580-1:2002)) | 41 | chevron_right |
| MSZ EN ISO 26304 MSZ EN ISO 26304 (Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification) | 62 | chevron_right |
| MSZ EN ISO 2702 MSZ EN ISO 2702 (Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)) | 12 | chevron_right |
| MSZ EN ISO 28941-1 MSZ EN ISO 28941-1 (Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 28941-1:2008)) | 20 | chevron_right |
| MSZ EN ISO 2897-1 MSZ EN ISO 2897-1 (Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2897-1:1997)) | 12 | chevron_right |
| MSZ EN ISO 2898-1 MSZ EN ISO 2898-1 (Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2898-1:1996)) | 2 | chevron_right |
| MSZ EN ISO 29988-1 MSZ EN ISO 29988-1 (Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 29988-1:2019)) | 22 | chevron_right |
| MSZ EN ISO 3183 MSZ EN ISO 3183 (Petroleum and natural gas industries - Steel pipe for pipeline transportation systems) | 220 | chevron_right |
| MSZ EN ISO 3506-1 MSZ EN ISO 3506-1 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020)) | 40 | chevron_right |
| MSZ EN ISO 3506-2 MSZ EN ISO 3506-2 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes) | 80 | chevron_right |
| MSZ EN ISO 3506-3 MSZ EN ISO 3506-3 (Fasteners - Mechanical properties of corrosion resistant stainless steel fasteners - Part 3: Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes) | 16 | chevron_right |
| MSZ EN ISO 3506-4 MSZ EN ISO 3506-4 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws with specified grades and hardness classes) | 28 | chevron_right |
| MSZ EN ISO 3506-5 MSZ EN ISO 3506-5 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications) | 9 | chevron_right |
| MSZ EN ISO 3506-6 MSZ EN ISO 3506-6 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020)) | 41 | chevron_right |
| MSZ EN ISO 3506-7 MSZ EN ISO 3506-7 (Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 7: Flat washers with specified grades and property classes) | 18 | chevron_right |
| MSZ EN ISO 4042 MSZ EN ISO 4042 (Fasteners - Electroplated coating systems (ISO 4042:2022)) | 72 | chevron_right |
| MSZ EN ISO 4613-1 MSZ EN ISO 4613-1 (Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993)) | 52 | chevron_right |
| MSZ EN ISO 4894-1 MSZ EN ISO 4894-1 (Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 4894-1:1997)) | 3 | chevron_right |
| MSZ EN ISO 4957 MSZ EN ISO 4957 (Tool steels) | 96 | chevron_right |
| MSZ EN ISO 5451 MSZ EN ISO 5451 (Ferrovanadium - Specification and conditions of delivery) | 6 | chevron_right |
| MSZ EN ISO 5755 MSZ EN ISO 5755 (Sintered metal materials. Specifications (ISO 5755:2022)) | 205 | chevron_right |
| MSZ EN ISO 5832-1 MSZ EN ISO 5832-1 (Implants for surgery - Metallic materials - Part 1: Wrought stainless steel) | 1 | chevron_right |
| MSZ EN ISO 5832-2 MSZ EN ISO 5832-2 (Implants for surgery - Metallic materials - Part 2: Unalloyed titanium) | 6 | chevron_right |
| MSZ EN ISO 5832-3 MSZ EN ISO 5832-3 (Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy) | 2 | chevron_right |
| MSZ EN ISO 5832-6 MSZ EN ISO 5832-6 (Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:2022)) | 1 | chevron_right |
| MSZ EN ISO 5832-7 MSZ EN ISO 5832-7 (Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy) | 1 | chevron_right |
| MSZ EN ISO 636 MSZ EN ISO 636 (Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification) | 37 | chevron_right |
| MSZ EN ISO 6402-1 MSZ EN ISO 6402-1 (Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 6402-1:2002)) | 25 | chevron_right |
| MSZ EN ISO 6501 MSZ EN ISO 6501 (Ferronickel - Specification and delivery requirements) | 5 | chevron_right |
| MSZ EN ISO 683-1 MSZ EN ISO 683-1 (Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering) | 28 | chevron_right |
| MSZ EN ISO 683-17 MSZ EN ISO 683-17 (Heat-treatable steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels) | 73 | chevron_right |
| MSZ EN ISO 683-2 MSZ EN ISO 683-2 (Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering) | 50 | chevron_right |
| MSZ EN ISO 683-3 MSZ EN ISO 683-3 (Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels) | 72 | chevron_right |
| MSZ EN ISO 683-4 MSZ EN ISO 683-4 (Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels) | 21 | chevron_right |
| MSZ EN ISO 683-5 MSZ EN ISO 683-5 (Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels) | 11 | chevron_right |
| MSZ EN ISO 683-7 MSZ EN ISO 683-7 (Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels) | 167 | chevron_right |
| MSZ EN ISO 6848 MSZ EN ISO 6848 (Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015)) | 11 | chevron_right |
| MSZ EN ISO 6931-1 MSZ EN ISO 6931-1 (Stainless steels for springs - Part 1:Wire) | 16 | chevron_right |
| MSZ EN ISO 7153-1 MSZ EN ISO 7153-1 (Surgical instruments - Materials - Part 1: Metals) | 50 | chevron_right |
| MSZ EN ISO 7391-1 MSZ EN ISO 7391-1 (Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications) | 60 | chevron_right |
| MSZ EN ISO 7792-1 MSZ EN ISO 7792-1 (Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7792-1:2012)) | 225 | chevron_right |
| MSZ EN ISO 7823-1 MSZ EN ISO 7823-1 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)) | 1 | chevron_right |
| MSZ EN ISO 7823-2 MSZ EN ISO 7823-2 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003)) | 1 | chevron_right |
| MSZ EN ISO 7823-3 MSZ EN ISO 7823-3 (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2001)) | 1 | chevron_right |
| MSZ EN ISO 8257-1 MSZ EN ISO 8257-1 (Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998)) | 37 | chevron_right |
| MSZ EN ISO 898-1 MSZ EN ISO 898-1 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread - Technical Corrigendum 1 (ISO 898-1:2013/Cor 1:2013)) | 10 | chevron_right |
| MSZ EN ISO 898-2 MSZ EN ISO 898-2 (Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes (ISO 898-2:2022)) | 7 | chevron_right |
| MSZ EN ISO 898-3 MSZ EN ISO 898-3 (Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes) | 4 | chevron_right |
| MSZ EN ISO 898-5 MSZ EN ISO 898-5 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread) | 4 | chevron_right |
| MSZ EN ISO 898-6 MSZ EN ISO 898-6 (Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread) | 7 | chevron_right |
| MSZ EN ISO 8986-1 MSZ EN ISO 8986-1 (Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:2009)) | 16 | chevron_right |
| MSZ EN ISO 9351 MSZ EN ISO 9351 (Galvanic anodes for cathodic protection in seawater and saline sediments) | 13 | chevron_right |
| MSZ EN ISO 9453 MSZ EN ISO 9453 (Soft solder alloys - Chemical compositions and forms) | 177 | chevron_right |
| MSZ EN ISO 9717 MSZ EN ISO 9717 (Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017)) | 3 | chevron_right |
| MSZ EN ISO 9988-1 MSZ EN ISO 9988-1 (Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 9988-1:2004)) | 97 | chevron_right |
| MSZ ENV 10080 MSZ ENV 10080 (Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric) | 4 | chevron_right |
| MSZ prEN 10138-2 MSZ prEN 10138-2 (Prestressing steels - Part 2: wire) | 8 | chevron_right |
| MSZ prEN 10138-3 MSZ prEN 10138-3 (Prestressing steels - Part 3: strand) | 22 | chevron_right |
| MSZ prEN 10138-4 MSZ prEN 10138-4 (Prestressing steels - Part 4: bars) | 6 | chevron_right |
| MSZ prEN 10268 MSZ prEN 10268 (Cold rolled flat products higher yield strength for cold forming - Technical delivery conditions) | 19 | chevron_right |
| MSZ prEN 10338 MSZ prEN 10338 (Hot rolled and cold rolled non-coated flat products of multiphase steels for cold forming - Technical delivery conditions) | 4 | chevron_right |
| MSZ-05-33.3011 MSZ-05-33.3011 (Chromium-molybdenum-vanadium tool steel. Requirements) | 1 | chevron_right |
| MSZ-05-33.3012 MSZ-05-33.3012 (Chromium-molybdenum-vanadium-cobalt tool steel) | 1 | chevron_right |
| MSZ-05-33.3015 MSZ-05-33.3015 (Alloyed steel for mandrel for tube sinking) | 4 | chevron_right |
| MSZ-05-33.3016 MSZ-05-33.3016 (Special alloyed steel for high stress pipedrift) | 1 | chevron_right |
| MSZ-05-33.3019 MSZ-05-33.3019 (Rolled and forged nonmagnetic steel. Classification. Technical requirements) | 1 | chevron_right |
| MSZ-05-33.3029 MSZ-05-33.3029 (Steel for high strength chain for mining) | 3 | chevron_right |
| MSZ-05-33.3031 MSZ-05-33.3031 (Free cutting steels with Pb and Te contants) | 2 | chevron_right |
| MSZ-05-33.3035 MSZ-05-33.3035 (Construction steel sheet GT 52. Technical requirements) | 1 | chevron_right |
| MSZ-05-33.3036 MSZ-05-33.3036 (Steel for pressure-bottle. Quality. Requirements) | 1 | chevron_right |