PROPRIETARY Inconel 718 Nickel Alloys
Data updates
This material has 331 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Inconel 718 Chemical Composition
Rolled Alloys, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Inconel 718 Physical Properties
Temperature
This material has 331 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Inconel 718 Heat Treatments
- Heat Treatment of Finished Parts
No. 1 Temper or Spring Temper: Anneal at 980°C (1800°F) 1 h, air cooling.
Age Harden at 720°C (1330°F) 8 h, furnace cooling..
Total Age at 620°C (1150°F) 18 h, air cooling..
No. 1 Temper or Spring Temper (for ISO 15156-3 / NACE MR 0175): Anneal at 1010°C (1850°F) 2 h, air cooling..
Age Harden at 790°C (1455°F) 6 h, air cooling.No. 1 Temper or Spring Temper: Age harden at 720°C (1330°F) 8 h, furnace cooling.Total Age at 620°C (1150°F) 18 h, air cooling. - Annealed at 980°C (1800°F)
Spring temper + aged (after spring coiling): Aged at 720°C (1325°F) for 8 h, furnace cool to 621°C (1150°F) and hold for a total aging time of 18 h
PROPRIETARY Inconel 718 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Inconel 718 International Equivalent Materials
Showing 15 of 150 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 150 international equivalents?
See all 150 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 150Cross References
- 40Composition
- 10Mechanical Properties
- 16Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 113Total Suppliers