DTD 5120B Aluminium Alloys
Data updates
This material has 202 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DTD 5120B Chemical Composition
D.T.D. 5120B: 1981 / Plate of Aluminium - Zinc - Magnesium - Copper - Zirconium Alloy (Solution treated, controlled stretched and artificially aged) (Zn 6.2, Mg 2.4, Cu 1.7, Zr 0.13) (7010-T7651)
Looking for full material performance data?
Free registration required • Instant access
DTD 5120B Physical Properties
Temperature
This material has 202 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DTD 5120B Heat Treatments
- Solution heat treat by heating at a temperature of 475 ± 10°C and quenching in water at a temperature not exceeding 40°C.
Artificial age by:
a. Heating to a temperature of 172 ± 3°C at a rate not exceeding 20°C per hour and soaking at this temperature for 6-15 hours followed by air cooling:
or
b. Heating at a temperature of 120 ± 3°C for 24 hours followed with or without cooling by further heating at a temperature of 172 ± 3°C for 6-15 hours followed by air cooling:
or
c. After ageing to treatments (a) or (b) above may be heated at 172 ± 3°C for an additional time.
DTD 5120B Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DTD 5120B International Equivalent Materials
Showing 15 of 74 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 74 international equivalents?
See all 74 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 74Cross References
- 13Composition
- 66Mechanical Properties
- 5Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 43Total Suppliers