PROPRIETARY CarTech 751 Alloy Nickel Alloys
Data updates
This material has 37 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CarTech 751 Alloy Chemical Composition
Carpenter Technology Corporation, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY CarTech 751 Alloy Physical Properties
Temperature
This material has 37 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CarTech 751 Alloy Heat Treatments
- In some cases, valves are used as-forged, without further treatment.
Valves may be aged at 700°C (1300°F) after forging.
When a finer grain size is desired for improved tensile properties, at the expense of creep-rupture strength, lower solution heat treatments are used. These temperatures are in the range 980-1070°C (1800-1950°F). The standard aging treatments follow these solution treatments.
Solution treatment: Heat to 1150°C (2100°F), hold at temperature for 4 hours, then air cool.
Age: Reheat to 840°C (1550°F), hold at temperature for 24 hours, cool to 700°C (1300°F), hold at temperature for 20 hours, then air cool.
PROPRIETARY CarTech 751 Alloy Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY CarTech 751 Alloy International Equivalent Materials
Showing 1 of 1 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 1 international equivalents?
See all 1 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 1Cross References
- 10Composition
- 8Mechanical Properties
- 13Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers