PROPRIETARY Pyromet Alloy 751 Nickel Alloys
Data updates
This material has 48 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Pyromet Alloy 751 Chemical Composition
Carpenter Technology Corporation, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Pyromet Alloy 751 Physical Properties
Temperature
This material has 48 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Pyromet Alloy 751 Heat Treatments
- In some cases, valves are used as-forged, without further treatment. Valves may be aged at 1300°F (700°C) after forging. When a finer grain size is desired for improved tensile properties, at the expense of creep-rupture strength, lower solution heat treatments are used. These temperatures are in the range 1800/1950°F (980/1070°C). The standard aging treatments follow these solution treatments. Solution Treatment: Heat to 2100°F (1150°C), hold at temperature for 4 hours, then air cool. Age Reheat to 1550°F (840°C), hold at temperature for 24 hours, cool to 1300°F (700°C), hold at temperature for 20 hours, then air cool.
PROPRIETARY Pyromet Alloy 751 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Pyromet Alloy 751 International Equivalent Materials
Showing 1 of 1 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 1 international equivalents?
See all 1 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 1Cross References
- 10Composition
- 8Mechanical Properties
- 12Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 1Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- 11Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers