NB GH4145 Nickel Alloys
Data updates
This material has 48 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
NB GH4145 Chemical Composition
NB/T 20008.4: 2012 / Other material for pressurized water reactor nuclear power plants - Part 4: Forged or rolled class 1,2 and 3 nickel-chromium-iron alloy parts
Looking for full material performance data?
Free registration required • Instant access
NB GH4145 Physical Properties
Temperature
This material has 48 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
NB GH4145 Heat Treatments
- After solution heat treatment at a temperature of between 1080°C and 1100°C with air or more rapid cooling, followed by structural hardening treatment including a minimum holding time of at least 20 hours at a temperature of 700°C ± 10°C, followed by air cooling.
- Bars to be used for the fabrication of pins shall be delivered after having been subjected to solution heat treatment at a temperature between 1080°C and 1100°C followed by water cooling, and age hardening including a 20 hours minimum holding period at a temperature of 700°C ± 10°C followed by air cooling. Bars to be used for the fabrication of internal bolting may be delivered, either in the solution heat treated condition defined in the preceding paragraph or after having been subjected, subsequent to solution heat treatment, to age hardening including a 20 hours minimum holding period at a temperature of 700°C ± 10°C followed by air cooling.
NB GH4145 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
NB GH4145 International Equivalent Materials
Showing 1 of 7 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 7 international equivalents?
See all 7 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 7Cross References
- 24Composition
- 12Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers