AFCEN NC 15 FeTNbA Nickel Alloys
Data updates
This material has 148 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
AFCEN NC 15 FeTNbA Chemical Composition
M 4102: RCC-M II: 2024 / Forged or rolled class 1, 2 and 3 nickel-chromium-iron alloy parts
Looking for full material performance data?
Free registration required • Instant access
AFCEN NC 15 FeTNbA Physical Properties
Temperature
This material has 148 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
AFCEN NC 15 FeTNbA Heat Treatments
- - Solution heat treatment 1080°C to 1100°C rapid cooling.
- Non-strain hardened at 700°C ± 10°C, 20 hours minimum.
- Strain-hardening 15 to 20% at 730°C ± 10°C, 16 hours minimum.
- Strain-hardening 50 to 65% at 650°C ± 10°C, 4 hours minimum. - Bars to be used for the fabrication of pins shall be delivered after having been subjected to solution heat treatment at a temperature between 1080°C and 1100°C followed by water cooling, and age hardening including a 20 hours minimum holding period at a temperature of 700°C ± 10°C followed by air cooling.
Bars to be used for the fabrication of internal bolting may be delivered, either in the solution heat treated condition defined in the preceding paragraph or after having been subjected, subsequent to solution heat treatment, to age hardening including a 20 hours minimum holding period at a temperature of 700°C ± 10°C followed by air cooling.
AFCEN NC 15 FeTNbA Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
AFCEN NC 15 FeTNbA International Equivalent Materials
Showing 1 of 7 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 7 international equivalents?
See all 7 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 7Cross References
- 35Composition
- 38Mechanical Properties
- 41Physical Properties
- 3Heat Treatment
- -Metallography
- -Machinability
- 3Stress-Strain
- -Formability
- 1Fatigue
- -Fracture
- 20Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers