PROPRIETARY VDM alloy C4 Nickel Alloys
Data updates
This material has 146 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY VDM alloy C4 Chemical Composition
VDM Metals GmbH, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY VDM alloy C4 Physical Properties
Temperature
This material has 146 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY VDM alloy C4 Heat Treatments
- Solution annealing should take place at temperatures of 1120°C (2048°F). Cooling down should be accelerated with water to achieve optimum corrosion properties. Fast air cooling can also be carried out at thicknesses of less than approx. 1.5 mm. In each heat treatment, the aforementioned cleanliness requirements must be observed. For strip and wire products, the heat treatment can be performed in a continuous furnace at a speed and temperature that is adapted to the material thickness.
PROPRIETARY VDM alloy C4 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY VDM alloy C4 International Equivalent Materials
Showing 15 of 27 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 27 international equivalents?
See all 27 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 27Cross References
- 11Composition
- 29Mechanical Properties
- 59Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 5Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 14Total Suppliers