PROPRIETARY Incoloy alloy 825 Nickel Alloys
Data updates
This material has 8145 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Incoloy alloy 825 Chemical Composition
A. M. Castle & Co., Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Incoloy alloy 825 Physical Properties
Temperature
This material has 8145 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Incoloy alloy 825 Heat Treatments
- Hot and Cold Forming: The hot-working range 870 to 1180°C (1600 to 2150°F). For optimum corrosion resistance, final hot working should be done at temperatures between 870 and 980°C (1600 and 1800°F). Cooling after hot working should be air cool or faster. Heavy sections may become sensitized during cooling from the hot-working temperature, and therefore be subject to intergranular corrosion in certain media. A stabilizing anneal restores resistance to corrosion. If material is to be welded or subjected to further thermal treatment and subsequently exposed to an environment that may cause intergranular corrosion, the stabilizing anneal should be performed regardless of cooling rate from the hot-working temperature.
Cold-forming properties and practices are essentially the same for INCOLOY alloy 825 as for INCONEL alloy 600. Although work-hardening rate is somewhat less than for the common grades of austenitic stainless steels, it is still relatively high. Forming equipment should be well powered and strongly built to compensate for the increase in yield strength with plastic deformation. - Annealed: 1832°F (1000°C).
PROPRIETARY Incoloy alloy 825 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Incoloy alloy 825 International Equivalent Materials
Showing 15 of 84 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 84 international equivalents?
See all 84 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 84Cross References
- 39Composition
- 44Mechanical Properties
- 100Physical Properties
- 3Heat Treatment
- 2Metallography
- -Machinability
- 12Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 10Joints
- -Coatings
- -Dimensions
- -Tribology
- 7806Corrosion
- -Ageing
- 6Weatherability
- 2Irradiation
- 37Total Suppliers