UNI P-AlZn5.8MgCuCr Aluminium Alloys

Material group: Nonferrous Alloys / Aluminium Alloys
Country / Standard: Italy / UNI
Indicative price:

Data updates

Latest Update: 2016-06
Total number of updates: 1
Update History

This material has 633 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

UNI P-AlZn5.8MgCuCr Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
Remainder
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
Cr
VALUE
0.18 – 0.28
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
1.2 – 2.0
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mg
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-95-4
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Other each
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Other total
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6
CRITERIA
Ti+Zr
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Zn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-66-6

UNI 9007-2: 1989 / Wrought primary aluminium and aluminium alloys, Aluminium-zinc alloys, Al Zn 5,8 Mg 2,5 Cu 1,6 Cr 0,23 (7075)

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

UNI P-AlZn5.8MgCuCr Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
69 — 79 GPa
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
0.041 — 0.058 Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
117 W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

This material has 633 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

UNI P-AlZn5.8MgCuCr Heat Treatments

  • Full Annealing (O) from 400 to 430°C for 1 to 3h to scheme with subsequent slow cooling in the oven (max. 25°C/h up to 200°C).
    T6 - Hardening in water (up to 40°C) from 460 to 480°C, after preheating for 0.5 to 3h in scheme followed by artificial aging from 115 to 125°C for 24h to scheme.
    T651 - Heat treatment equal to T6, planned for the laminates that receive after quenching and before aging. Artificial a relaxing ironing involving a permanent deformation of 1.5 to 3%.
    T6510 - Heat treatment equal to T6, planned for the extrudes that receive after quenching and before aging artificial a relaxing ironing comprising a 1 to 3% permanent deformation.
    T6511 - Heat treatment equal to T6510, provided for receiving the extruded modest operations of straightening after ironing, for reasons of dimensional tolerances.
    T652 - Heat treatment equal to T6, planned for forgings that receive after quenching and before aging artificial operation of cold compression for stretching the material comprising a permanent deformation from 1 to 4%
    T76 Quenching into water (up to 40°C) from 460 to 480°C after preheating for 0.5 to 3 h to scheme, followed by aging. Artificial in two stages of which the first 115 to 125°C for 3 to 5h at full power and the second to:
    - Laminated - from 160 to 170°C for 15 to 18h in scheme
    - Extruded - from 155 to 165°C for 18 to 21 has scheme.
    T73 - Hardening in water (up to 40°C) from 460 to 480°C after preheating for 0.5 to 3h to scheme, followed by aging. Artificial in two stages the first of which from 100 to 110°C for 6 to 8h in the scheme and according to:
    - Laminated - from 160 to 170°C for 24 to 30h in scheme
    - Extruded - from 170 to 180°C for 6 to 8h in scheme
    - Drawn, forged and printed - from 170 to 180°C for 8 to 10h to scheme.
    T7352 - Heat treatment equal to T73, the second stage of the artificial aging cycle is carried out from 170 to 180°C for 6 to 8h in scheme.

UNI P-AlZn5.8MgCuCr Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 275 MPa
Unlock full details
Full data available with free access View Complete Material Data
Brinell Hardness (HB)
≥ 70
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
≥ 1 %
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

UNI P-AlZn5.8MgCuCr International Equivalent Materials

Showing 15 of 145 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
AlZnMgCu1,5
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
3.4365
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
7075
STANDARD
AA
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-7075
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
AL-P7075
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A97075
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A-Z5GU
STANDARD
AFNOR NF
COUNTRY / PRODUCER
France
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
SB-241 7075
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-AlZn5,5MgCu
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 7075 FD
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 7075 FH
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 7075 BE
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 7075T
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
7075
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
7075
STANDARD
SAE
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 145 international equivalents?

See all 145 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 145Cross References
  • 12Composition
  • 324Mechanical Properties
  • 16Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • 81Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 54Total Suppliers