SAE 7075 Aluminium Alloys

Material group: Nonferrous Alloys / Aluminium Alloys
Country / Standard: United States / SAE
Indicative price:

Data updates

Latest Update: 2026-01
Total number of updates: 43
Update History

This material has 5117 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE 7075 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
Remainder
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
Cr
VALUE
0.18 – 0.28
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
1.2 – 2.0
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mg
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-95-4
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Other each
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Other total
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6
CRITERIA
Zn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-66-6

SAE AMS 4154R: 2015 / Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T6510, 7075-T6511) Solution Heat Treated, Stress Relieved by Stretching When Required and Precipitation Heat Treated

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE 7075 Physical Properties

Temperature

PROPERTY / VALUE
Compression Modulus
72 — 74 GPa
Unlock full details
Full data available with free access View Complete Material Data
Modulus of Elasticity
69 — 79 GPa
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
val1
Full data available with free access View Complete Material Data
W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
0.052 Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Heat Capacity
val1
Full data available with free access View Complete Material Data
J/(kg∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Shear Modulus
val1
Full data available with free access View Complete Material Data
GPa
Unlock full details
Full data available with free access View Complete Material Data
Coefficient of Thermal Expansion (CTE)
val1
Full data available with free access View Complete Material Data
10-6/°C
Unlock full details
Full data available with free access View Complete Material Data

This material has 5117 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE 7075 Heat Treatments

  • After Solution and Precipitation Heat Treatment: Rods 4 in. (100 mm) and under in nominal diameter; square, hexagonal, and octagonal bar 3-l/2 in. (90 mm) and under in nominal thickness; and rectangular bar 3 in. (75 mm) and under in nominal thickness and 6 in. (150 mm) and under in nominal width or 10 in. (250 mm) and under in nominal width when nominal thickness is under 3 in. (75 mm), and wire shall have the following properties after solution and precipitation heat treatment in accordance with AMS 2770 to the T62 temper
  • Sheet: Solution and precipitation heat treated to the T6 temper. Plate: Solution heat treated in accordance with AMS 2772 and stretched to produce a nominal permanent set of 2% but not less than 1-1/2% nor more than 3%, and precipitation heat treated to the T651 temper.

SAE 7075 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 75 MPa
Unlock full details
Full data available with free access View Complete Material Data
Brinell Hardness (HB)
≥ 124
Unlock full details
Full data available with free access View Complete Material Data
Compression Yield Strength
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
≥ 1 %
Unlock full details
Full data available with free access View Complete Material Data
Grain Size
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

SAE 7075 International Equivalent Materials

Showing 15 of 166 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
A97075
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
AlZnMgCu1,5
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
7075
STANDARD
AA
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
3.4365
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-7075
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
7075
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Official
MATERIAL
A-Z5GU
STANDARD
AFNOR NF
COUNTRY / PRODUCER
France
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-AlZn5,5MgCu
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
AL-P7075
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 7075 FD
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 7075 FH
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 7075P
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 7075 BE
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 7075T
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
7075
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 166 international equivalents?

See all 166 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 166Cross References
  • 403Composition
  • 3048Mechanical Properties
  • 139Physical Properties
  • 4Heat Treatment
  • 1Metallography
  • -Machinability
  • 840Stress-Strain
  • 24Formability
  • 262Fatigue
  • 64Fracture
  • 7Creep
  • 8Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • 73Ageing
  • -Weatherability
  • -Irradiation
  • 78Total Suppliers