UNI P-AlCu4.4SiMnMg Aluminium Alloys

Material group: Nonferrous Alloys / Aluminium Alloys
Country / Standard: Italy / UNI
Indicative price:

Data updates

Latest Update: 2016-06
Total number of updates: 2
Update History
2014-03

This material has 484 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

UNI P-AlCu4.4SiMnMg Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
Remainder
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
Cr
VALUE
≤ 0.1
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
3.9 – 5.0
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mg
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-95-4
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Other
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6
CRITERIA
Zn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-66-6

UNI SPERIMENTALE 3581: 1955 / Primary wrought aluminium-copper-silicium-manganese-magnesium-alloy (Cu 4.4% - Si 0.8% - Mn 0.8% - Mg 0.4%)

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

UNI P-AlCu4.4SiMnMg Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
69 — 79 GPa
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
0.0345 — 0.043 Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
154.808 — 193 W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

This material has 484 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

UNI P-AlCu4.4SiMnMg Heat Treatments

  • Full Annealing (O) from 390 to 420°C to scheme with subsequent slow cooling in the oven (max. 25°C/h up to 200°C).
    T4 - Hardening in water (up to 40°C) from 492 to 502°C after preheating for 0.5 to 2h in scheme followed by natural aging (50°C max.) for at least 96h.
    T6 - Hardening in water (up to 40°C) from 492 to 502°C after preheating for 0.5 to 2h in scheme followed by artificial aging to:
    - Extruded - 155 to 165°C for 18h in scheme (or 170 to 180°C for 8 to 10h at regime)
    - Forged and printed - 165 to 175°C for 10h to scheme.
    T4510, T6510 - Heat treatments equal to T4 and T6 provided to the extrudes that receive after hardening and before a distension of aging artificial ironing comprising a 1 to 3% permanent deformation.
    T4511, T6511 - Heat treatments equal to T4510 and T6510 provided for receiving extruded after ironing modest operations of straightening for reasons of dimensional tolerances.
    T652 - Heat treatment equal to T6 forgings intended for receiving after quenching and before aging artificial a cold compression operation for stretching the material comprising a permanent deformation from 1 to 4%.
    T42, T62 - Heat treatments performed for the purpose of control, the same as T4 and T6 applicable to extrusions that are provided in the state O (annealed) or in F (as extrusion) was to test the response of the material to heat treatment.
  • R: Full annealing at 390 - 420°C for 2 - 4 hours; slow cooling in oven (max 20°C/h until 200°C). TN: Water quenching (10 - 30°C) from 490 - 505°C, after preheating for 0.5 - 1 hour in salt bath; natural ageing (max 50°C) for 48 - 96 hours; TA: Water quenching (10 - 30°C) from 490 - 505°C, after preheating for 0.5 - 1 hour in salt bath; artificial ageing at 168 - 185°C for 8 - 12 hours; Hot working range: 260 - 480°C

UNI P-AlCu4.4SiMnMg Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
186 — 520 MPa
Unlock full details
Full data available with free access View Complete Material Data
Brinell Hardness (HB)
≥ 65
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
1 — 19 %
Unlock full details
Full data available with free access View Complete Material Data
Impact Strength
val1
Full data available with free access View Complete Material Data
kJ/m²
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

UNI P-AlCu4.4SiMnMg International Equivalent Materials

Showing 15 of 195 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
AlCuSiMn
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
3.1255
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
2014
STANDARD
AA
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-2014
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-Al Cu4SiMg
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A92014
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
SB-247 2014
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
SB-241 2014
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
B 221 2014
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
AlCu4SiMg
STANDARD
ISO
COUNTRY / PRODUCER
International
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 2014 FH
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 2014 BE
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 2014T
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 2014 FD
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
2014
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 195 international equivalents?

See all 195 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 195Cross References
  • 22Composition
  • 146Mechanical Properties
  • 27Physical Properties
  • 2Heat Treatment
  • -Metallography
  • -Machinability
  • 38Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 54Total Suppliers