76528 (India / IS) Material Properties

Material group: Nonferrous Alloys / Aluminium
Country/Standard: India / IS

Data updates

Latest Update: 2021-06
Total number of updates: 1
Update History:

Mechanical Properties

Temperature

0 - 30°C
PROPERTY / VALUE
Yield Strength, Rp0.2 415 MPa view details
Tensile Strength 245 — 290 MPa view details
Elongation, A 6 % view details
Yield Strength, Rp0.2 60.2 ksi view details
Tensile Strength 35.5 — 42.1 ksi view details
Elongation, A 6 % view details

Physical Properties

Temperature

0 - 30°C
PROPERTY / VALUE
Modulus of Elasticity 69 — 79 GPa view details
Density 2.6 — 2.9 kg/dm³ view details
Poisson Coefficient 0.33 view details
Modulus of Elasticity 10 E+03 — 11.5 E+03 ksi view details
Density 0.094 — 0.105 lb/in³ view details
Poisson Coefficient 0.33 view details

Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
Remainder
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
Cr
VALUE
0.20 – 0.28
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
1.2 – 2.0
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mg
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7439-95-4
CRITERIA
Mn
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Si
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-32-6
CRITERIA
Zn
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-66-6

IS 733: 1983 / Specification for Wrought Aluminium and Aluminium Alloy Bars, Rods and Sections (for General Engineering Purposes)

Heat Treatments

  • Type I: Annealed Type II: Solution treat by heating at a temperature of 460 +/- 10°C and quench in water at a temperature not exceeding 40°C. Precipitation treat by heating at a temperature of 135 +/- 5°C for not less than 12 hours. Type III: As specified by the purchaser