B.S. HR 601 Nickel Alloys
Data updates
This material has 195 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
B.S. HR 601 Chemical Composition
BS 3HR 601: 1989 / Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire for the manufacture of fasteners (maximum diameter or minor sectional dimension 30 mm) (nickel base Cr 19.5, Ti 2.2, Al 1.4)
Looking for full material performance data?
Free registration required • Instant access
B.S. HR 601 Physical Properties
Temperature
This material has 195 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
B.S. HR 601 Heat Treatments
- 8% <= cold worked <= 12% solution treated D < 15 mm, 1080°C/15 min <= t <= 30 min/air cool or faster 15 mm <= D <= 30 mm, 1080°C/80 min <= t <= 60 min/air cool or faster. Delivery condition + 750°C/t = 4h/air cool
- Delivery = use condition: HR 601A - (8% <= cold worked <= 12% + straightened + solution heat treated + ground or descaled) treated at θ = (1 080 ±10) °C/ AC or faster (for D = 15 mm: 15 min = t = 30 min; for 15 mm = D = 30 mm: 30 min = t = 60 min); HR 601B - (8% <= cold worked <= 12% + softened) treated at 1 080 °C = θ = 1 120 °C/ WC; HR 601C - (8% <= cold worked <= 12% + straightened + ground); Solution treated + precipitation treated θ = (1 080 °C ±10) °C/AC or faster (D <= 15 mm: 15 min <= t <= 30 min; 15 mm <= D <= 30 mm: 30 min <= t <= 60 min) + θ = (750 ±10) °C/ t = 4 h/AC.
B.S. HR 601 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
B.S. HR 601 International Equivalent Materials
Showing 15 of 79 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 79 international equivalents?
See all 79 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 79Cross References
- 30Composition
- 10Mechanical Properties
- 6Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 1Creep
- 1Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- 13Ageing
- -Weatherability
- -Irradiation
- 51Total Suppliers