SAE 440C Stainless steels
Data updates
This material has 52 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE 440C Chemical Composition
SAE AMS 5899D: 2024 / Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock 17Cr - 0.52Mo (0.95 - 1.20C) (440C) Powder Metallurgy Product, Hot Isostatically Pressed
Looking for full material performance data?
Free registration required • Instant access
SAE 440C Physical Properties
Temperature
This material has 52 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE 440C Heat Treatments
- Specimens from product 9.52 mm and under in nominal thickness and specimens not less than 9.52 mm thick in any dimension cut from larger product shall have hardness not lower than 58 HRC, or equivalent after being heated to 1024°C ± 6°C (1875°F ± 10°F), held at heat for 30 minutes ± 3 minutes, and cooled at a rate equivalent to cooling in still air.
SAE 440C Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE 440C International Equivalent Materials
Showing 1 of 7 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 7 international equivalents?
See all 7 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 7Cross References
- 9Composition
- 3Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 28Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 1Total Suppliers