GOST S32109 Stainless steels
Data updates
This material has 573 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
GOST S32109 Chemical Composition
GOST R 71798: 2024 / Pipes of austenitic chromium-nickel stainless steel, welded by electric fusion welding, for high temperature service and general applications. Specification
Looking for full material performance data?
Free registration required • Instant access
GOST S32109 Physical Properties
Temperature
This material has 573 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
GOST S32109 Heat Treatments
- Annealed at > 1040°C, quenching in water or accelerated cooling by other means.
Solution annealing at temperatures above 1065°C may degrade the intergranular corrosion resistance after further exposure to sensitizing conditions. At customer's request, solution annealing at high temperatures may be followed by re-annealing or stabilization at a lower temperature. - For cold-formed pipes: ≥ 1100°C, quenching in water or accelerated cooling by other means
For hot-formed pipes: ≥ 1050°C, quenching in water or accelerated cooling by other means;
Heat treatment at temperatures above 1065°C may impair their resistance to intercrystalline corrosion.
GOST S32109 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
GOST S32109 International Equivalent Materials
Showing 15 of 444 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 444 international equivalents?
See all 444 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 444Cross References
- 41Composition
- 41Mechanical Properties
- 3Physical Properties
- 5Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 22Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 17Total Suppliers