PROPRIETARY VP50IM Structural and constructional steels

Material group: Ferrous Alloys / Structural and constructional steels
Country / Standard: PROPRIETARY

Data updates

Latest Update: 2022-01
Total number of updates: 1
Update History

This material has 15 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY VP50IM Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
1.00
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
C
VALUE
0.15
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cu
VALUE
1.00
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
Ni
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-02-0
CRITERIA
S
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3

Villares Metals, Product Data Sheets,

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY VP50IM Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
190 — 210 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
7.67 — 7.86 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
0.27 — 0.3
Unlock full details
Full data available with free access View Complete Material Data

This material has 15 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY VP50IM Heat Treatments

  • Solubilization: Heat slowly and evenly to 400°C at a rate of 100°C/h. Then, at a maximum of 300°C/h, heat up to a solubilization temperature between 880/920°C, keep until completely homogenized and then cool in forced air. Cooling can also be carried out in oil suitable for quenching, stirred and heated at 40/70°C, until the part reaches a temperature of 100°C, then cooling in calm air to room temperature.

    Stress Relief: Stress relief is not performed as applied to traditional steels; it occurs during the aging stage.

    Aging: The heating cycle should be in steps every 100°C, with a soak time of 30 minutes for every 25mm of the thinnest thickness, to prevent machining stresses from causing distortions. T he aging temperature is 500°C. Time at temperature should be 6 hours. After aging, the piece must be cooled in calm air. If the part has been solubilized again, carry out aging only after reaching room temperature.

    Nitriding: Nitride between 480 and 510°C, varying according to the process used, obtaining hardness of 600-650 HV in the nitrided layer. As they have coincident temperatures, it is not necessary to carry out the aging treatment when the matrix is ​​nitrided, as long as the nitriding time is sufficient for aging.

PROPRIETARY VP50IM Mechanical Properties

Temperature

PROPERTY / VALUE
Rockwell Hardness (HR)
30 — 42
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • -Cross References
  • 8Composition
  • 2Mechanical Properties
  • 3Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 1Total Suppliers