VdTÜV X10NiCrAlTi32-20 Stainless steels
Data updates
This material has 457 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
VdTÜV X10NiCrAlTi32-20 Chemical Composition
WB 412: 2023 / Rolled and forged steel X10NiCrAlTi32-20; Material number. 1.4876; Sheet, strip, bar, forging, seamless tube
Looking for full material performance data?
Free registration required • Instant access
VdTÜV X10NiCrAlTi32-20 Physical Properties
Temperature
This material has 457 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
VdTÜV X10NiCrAlTi32-20 Heat Treatments
- Annealed at 900-980°C, recommended holding time:
for t < 10 mm, 5 to 15 min
for 10 ≤ t < 25 mm, 15 to 30 min
for 25 ≤ t < 50 mm, 1 to 1.5 h
for 50 ≤ t < 100 mm, 1.5 to 2.5 h
for 100 ≤ t < 250 mm, 2.5 to 4.5 h
Cooled in water or air
Solution annealed at 1100-1150°C, recommended holding time:
for t < 10 mm, 5 to 20 min
for 10 ≤ t < 25 mm, 30 to 60 min
for 25 ≤ t < 50 mm, 1 to 2 h
for 50 ≤ t < 100 mm, 2 to 3 h
for 100 ≤ t < 250 mm, 3 to 5 h
Cooled in water or air
An increase in the soft annealing temperature up to 1050°C and an increase in the solution annealing temperature up to 1200°C and different holding times are permitted.
VdTÜV X10NiCrAlTi32-20 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
VdTÜV X10NiCrAlTi32-20 International Equivalent Materials
Showing 15 of 173 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 173 international equivalents?
See all 173 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 173Cross References
- 13Composition
- 68Mechanical Properties
- 10Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 1Creep
- 51Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 140Total Suppliers