ASD-STAN FE-PL80 Structural and constructional steels
Data updates
This material has 69 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASD-STAN FE-PL80 Chemical Composition
prEN 2759: 1986 / Aerospace series Steel FE-PL80 1900 ≤ Rm ≤ 2100 MPa Forging De ≤ 75 mm
Looking for full material performance data?
Free registration required • Instant access
ASD-STAN FE-PL80 Physical Properties
Temperature
This material has 69 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASD-STAN FE-PL80 Heat Treatments
Condition and heat treatment (delivery):
Normalized and softened:
915 ≤ θ ≤ 935°C / t ≥ 1 h / AC + softened
Condition and heat treatment (used):
Hardened and tempered:
Delivery condition:
+ 860 ≤ θ ≤ 880°C / t ≥ 1 h / OQ
+ Tempered 295 ≤ θ ≤ 305°C / t ≥ 2 h / AC
+ Tempered 295 ≤ θ ≤ 305°C / t ≥ 2 h / AC
Condition and heat treatment (reference):
Hardened and tempered:
870 ± 10°C / t = 1h / OQ
+ Tempered 300 ± 5°C / t = 2 h / AC
+ Tempered 300 ± 5°C / t = 2 h / AC
Condition and heat treatment (delivery):
Normalized and softened:
915 ≤ θ ≤ 935°C / t ≥ 1 h / AC + softened
Condition and heat treatment (used):
Hardened and tempered:
Delivery condition:
+ 860 ≤ θ ≤ 880°C / t ≥ 1 h / OQ
+ Tempered 295 ≤ θ ≤ 305°C / t ≥ 2 h / AC
+ Tempered 295 ≤ θ ≤ 305°C / t ≥ 2 h / AC
Condition and heat treatment (reference):
Hardened and tempered:
870 ± 10°C / t = 1h / OQ
+ Tempered 300 ± 5°C / t = 2 h / AC
+ Tempered 300 ± 5°C / t = 2 h / AC
ASD-STAN FE-PL80 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASD-STAN FE-PL80 International Equivalent Materials
Showing 1 of 6 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 6 international equivalents?
See all 6 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 6Cross References
- 20Composition
- 38Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers