MSZ 17SMn20 Structural and constructional steels
Data updates
This material has 149 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
MSZ 17SMn20 Chemical Composition
EN 10277: 2018 / Bright steel products - Technical delivery conditions
Looking for full material performance data?
Free registration required • Instant access
MSZ 17SMn20 Physical Properties
Temperature
This material has 149 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
MSZ 17SMn20 Heat Treatments
- Carburizing: 880-980°C. The carburizing temperature will depend on the chemical composition of the steel, the mass of the product, and the carburizing medium. If the steels are direct hardened, in general a temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures, for example 1020°C to 1050°C, are not unusual;
Direct and simple hardening: 830-870°C;
Double hardening: Core-hardening: 880-920°C and case-hardening: 780-820°C; Quenching agent: water, oil, emulsion (depends, for example, on the shape of the products, the cooling conditions and the quantity of furnace filling);
Tempering: 150-200°C (1h minimum).
MSZ 17SMn20 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
MSZ 17SMn20 International Equivalent Materials
Showing 15 of 48 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 48 international equivalents?
See all 48 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 48Cross References
- 15Composition
- 58Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 22Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers