PROPRIETARY Buderus 2311 Tool steels
Data updates
This material has 58 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Buderus 2311 Chemical Composition
Buderus Edelstahl GmbH, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Buderus 2311 Physical Properties
Temperature
This material has 58 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Buderus 2311 Heat Treatments
- Stress relieving: Temperature: Approx. 550 °C in the quenched and tempered state; Duration: 1 hour per 50 mm wall thickness; Cooling: Furnace.
Soft annealing: Temperature: 720 °C; Duration: 1 hour per 25 mm wall thickness; Cooling: Furnace.
Hardening: Temperature: 880 °C; Duration: 1 minute per mm wall thickness.
Quenching hardness: Max. 54 HRC in oil, hot bath or vacuum.
Tempering: Temperature: See tempering curve; Duration: 1 hour per 25 mm wall thickness; Cooling: Air.
Working hardness 280–325 HB
PROPRIETARY Buderus 2311 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Buderus 2311 International Equivalent Materials
Showing 12 of 15 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 15 international equivalents?
See all 15 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 15Cross References
- 7Composition
- 6Mechanical Properties
- 12Physical Properties
- 4Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 14Total Suppliers