PROPRIETARY KeyLos 2311 Tool steels
Data updates
This material has 49 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY KeyLos 2311 Chemical Composition
Lucchini RS, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY KeyLos 2311 Physical Properties
Temperature
This material has 49 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY KeyLos 2311 Heat Treatments
- Supplied in the pre-treated condition with surface hardness between 280 and 330 HB. Soft annealing: at 700°C, soaking time 60 min every 25 mm thickness, cooling slow in the furnace. Stress relieving at 550°C, soaking time 60 min every 25 mm thickness, cooling slow in the furnace. If the suggested temperature is lower than the tempering temperature, the stress relieving temperature will be 50°C lower than the tempering temperature previously applied. Hardening: at 850°C, soaking time 60 min every 25 mm thickness, cooling oil or water quench. Tempering temperature depends on the required mechanical properties, soaking time: 60 min every 25 mm thickness, cooling at room temperature.
PROPRIETARY KeyLos 2311 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY KeyLos 2311 International Equivalent Materials
Showing 12 of 15 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 15 international equivalents?
See all 15 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 15Cross References
- 5Composition
- 2Mechanical Properties
- 11Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 15Total Suppliers