PROPRIETARY SIHARD 2631 Tool steels
Data updates
This material has 51 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SIHARD 2631 Chemical Composition
SIJ Metal Ravne, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY SIHARD 2631 Physical Properties
Temperature
This material has 51 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SIHARD 2631 Heat Treatments
- Soft annealing: Heat to 820-870°C, cool slowly in furnace. This will produce a maximum Brinell hardness of 250.
Stress relieving: Stress relieving to remove machining stresses should be carried out by heating to approx. 650°C, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening: Harden from a temperature of 1020-1050°C followed by oil, air or warm bath (approx. 400°C) quenching. Hardness after quenching is 61 HRC.
Tempering temperature: 150-400°C.
PROPRIETARY SIHARD 2631 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY SIHARD 2631 International Equivalent Materials
Showing 4 of 7 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 7 international equivalents?
See all 7 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 7Cross References
- 6Composition
- 10Mechanical Properties
- 17Physical Properties
- 3Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 8Total Suppliers