PROPRIETARY HS 6-5-2-5 Structural and constructional steels
Data updates
This material has 324 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY HS 6-5-2-5 Chemical Composition
Lucefin, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY HS 6-5-2-5 Physical Properties
Temperature
This material has 324 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY HS 6-5-2-5 Heat Treatments
- Hot-forming: 1100 - 900°C. Stress-relieving after machining and before quenching: 600 - 650°C, furnace cooling to 320°C, then air. Pre-heating: 450°C, pause, then 870°C, pause, then 1050°C, pause. Quenching heatings must be carried out in controlled atmosphere furnace: 1190 - 1230°C, oil, polymer, forced air or salt bath (500 - 550°C). Tempering: 550 - 580°C, calm air, minimum 2 cycles. Soft annealing: 820°C furnace cooling to 600°C, then air. Isothermal annealing: 870°C furnace cooling to 700°C, then air. All high-speed steels must be annealed after hot-forming. Mechanical properties at different tempering temperatures obtained after quenching at 1210°C in oil.
PROPRIETARY HS 6-5-2-5 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY HS 6-5-2-5 International Equivalent Materials
Showing 15 of 165 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 165 international equivalents?
See all 165 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 165Cross References
- 10Composition
- 30Mechanical Properties
- 16Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 102Total Suppliers