AIR 15 CDV 6 Structural and constructional steels
Data updates
This material has 237 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
AIR 15 CDV 6 Chemical Composition
AIR 9160/C: 1973 / General conditions for delivery and use of wrought steels used in aeronautical structures
Looking for full material performance data?
Free registration required • Instant access
AIR 15 CDV 6 Physical Properties
Temperature
This material has 237 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
AIR 15 CDV 6 Heat Treatments
- For bars:
Hardened and tempered (T1080) for d = 16 mm: Hardened at 975 +/- 10°C, Tempered at 625 +/- 5°C;
Hardened and tempered (T980): Hardened at 965 - 985°C, Tempered at 620 - 650°C;
Hardened and tempered (T1080) for 16 < d <= 25 mm: Hardened at 965 - 985°C, Tempered at 600 - 630°C;
For sheets:
Hardened and tempered (T980) for t <=2 mm: Hardened at 965 - 985°C, Tempered at 620 - 650°C;
Hardened and tempered (T1080) for 2 < t <= 20 mm: Hardened at 965 - 985°C, Tempered at 600 - 630°C;
For seamless tubes:
Hardened and tempered (T980) for t <= 4 mm: Hardened at 965 - 985°C, Tempered at 620 - 650°C;
Hardened and tempered (T1080) for 4 < t <= 20 mm: Hardened at 965 - 985°C, Tempered at 600 - 630°C;
AIR 15 CDV 6 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
AIR 15 CDV 6 International Equivalent Materials
Showing 15 of 111 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 111 international equivalents?
See all 111 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 111Cross References
- 8Composition
- 40Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- 1Formability
- -Fatigue
- -Fracture
- -Creep
- 1Joints
- -Coatings
- -Dimensions
- -Tribology
- 5Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 66Total Suppliers