PROPRIETARY CryElso 203 Structural and constructional steels
Data updates
This material has 150 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CryElso 203 Chemical Composition
Arcelor Mittal, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY CryElso 203 Physical Properties
Temperature
This material has 150 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CryElso 203 Heat Treatments
- The material is most generally quenched and tempered or normalized, accelerated cooled and tempered. Tempering temperature is performed above 595°C. PWHT is in the range 580 - 600°C at 1h + 1h/50 mm.
- The material is most generally quenched and tempered or normalized, accelerated cooled and tempered. However, as a function of the grade, the level of properties required and the thickness range, the material may also be normalized or normalized and tempered.
Tempering temperature is performed above 595°C (1100°F) and adjusted as a function of the parameters noted above.
PWHT is in the range 580-600°C (1220-1270°F) at 1 hour + 1 hour per 50 mm.
To avoid any occurrence of cold cracking, it is recommended to preheat at 100°C all plates above 25 mm thickness. To achieve high level of toughness in the weld metal, an interpass temperature control is mandatory.
PROPRIETARY CryElso 203 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY CryElso 203 International Equivalent Materials
Showing 15 of 77 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 77 international equivalents?
See all 77 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 77Cross References
- 14Composition
- 1Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 53Total Suppliers