PROPRIETARY Acidur 4122 Stainless steels
Data updates
This material has 169 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Acidur 4122 Chemical Composition
Schmolz + Bickenbach, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Acidur 4122 Physical Properties
Temperature
This material has 169 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Acidur 4122 Heat Treatments
- Soft annealed by holding at a temperature in the range 750 - 850°C followed by slow cooling in air or in a furnace. Can be hardened by holding at a temperature between 980 - 1060°C followed by cooling in oil or polymer. The heat treated condition usually specified is the QT750 condition and is obtained by tempering in the temperature range 650 - 750 °C.
- The heat treatment, which leads to the soft annealed state, consists of a holding in the Temperature range 750°C - 850°C with subsequent air cooling. The mechanical properties can be improved by a tempering in which the steel is first heated by holding at temperatures between 980°C and 1060°C. Subsequently quenching in air, in oil or polymer. The tempering temperature is dependent on the desired strength. In most cases, the state is QT750, which is achieved by annealing 650°C - 750°C with air cooling.
PROPRIETARY Acidur 4122 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Acidur 4122 International Equivalent Materials
Showing 15 of 66 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 66 international equivalents?
See all 66 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 66Cross References
- 8Composition
- 16Mechanical Properties
- 22Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 55Total Suppliers