PROPRIETARY T 15 Mo HTM Structural and constructional steels
Data updates
This material has 28 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY T 15 Mo HTM Chemical Composition
Sintec HTM AG, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY T 15 Mo HTM Physical Properties
Temperature
This material has 28 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY T 15 Mo HTM Heat Treatments
- Normalised to 800°C – 850°C for 5 - 10h, followed by controlled cooling to 650°C at a rate of 10°C/1h. Stress-relieve annealed at 550 - 650°C for 2 - 5h. Cooled slowly to 500°C then cooled naturally in air. Heat treatment 1: Hardened at 1100°C. Tempered at 560°C. Heat treatment 2: Hardened at 1150°C. Tempered at 580°C. Heat treatment 3: Hardened at 1180°C. Tempered at 580°C. Heat treatment 4: Hardened at 1100°C. Tempered at 540°C. Heat treatment 5: Hardened at 1150°C. Tempered at 520°C. Heat treatment 6: Hardened at 1180°C. Tempered at 540°C.
PROPRIETARY T 15 Mo HTM Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY T 15 Mo HTM International Equivalent Materials
Showing 3 of 4 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 4 international equivalents?
See all 4 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 4Cross References
- 6Composition
- 6Mechanical Properties
- 6Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 5Total Suppliers