PROPRIETARY THYRAPID 3333 Tool steels
Data updates
This material has 120 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY THYRAPID 3333 Chemical Composition
Edelstahl Witten-Krefeld, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY THYRAPID 3333 Physical Properties
Temperature
This material has 120 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY THYRAPID 3333 Heat Treatments
- Soft annealing at 770 - 840°C, furnace cooling. Stress-relief annealing at 630 - 650°C, furnace cooling. 1st pre-heating up to approx. 450°C. 2nd pre-heating at 850°C and 3rd pre-heating at 850°C and 1050°C. Hardening at 1180 - 1220°C. For cold-forming tools of a complex geometry, a hardening temperature at the lower end of the quoted range is recommended. The stated hardening temperatures apply to saltbath hardening only. For vacuum hardening,we suggest a reduction of 10 to 30 °C. Quenching in saltbath at 550°C, oil or air. Tempering at least twice at 540 - 560°C. Tempering at 100, 200, 300, 400, 500, 525, 550, 575 and 600°C.
PROPRIETARY THYRAPID 3333 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY THYRAPID 3333 International Equivalent Materials
Showing 11 of 54 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 54 international equivalents?
See all 54 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 54Cross References
- 5Composition
- 11Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 46Total Suppliers