PROPRIETARY RA6 Tool steels
Data updates
This material has 419 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY RA6 Chemical Composition
Aubert & Duval, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY RA6 Physical Properties
Temperature
This material has 419 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY RA6 Heat Treatments
- Heat gradually to 875°C. Hold at 875°C then cool slowly in the furnace. Take usual precautions to avoid decarburization.
Hardening: First preheat to 550°C; Second preheat to 850°C; Heat to 1150-1200°C; Air cool or gas pressure quench. For large parts, air cooling may be replaced by hardening in a salt bath at 550°C, followed by cooling in air to room temperature. It is recommended that heating should take place in a neutral atmosphere.
Tempering: Between 550 and 600°C, depending on hardening temperature and hardness required. Double or triple temper required.
After hardening at 1180°C and double tempering at 550°C material will have given HRC value.
PROPRIETARY RA6 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY RA6 International Equivalent Materials
Showing 15 of 209 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 209 international equivalents?
See all 209 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 209Cross References
- 5Composition
- 2Mechanical Properties
- 7Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 194Total Suppliers