DIN 1.7232 Cast steels
Data updates
This material has 147 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN 1.7232 Chemical Composition
SEW 835: 2018 / Cast steel for flame and induction hardening - Technical conditions of delivery
Looking for full material performance data?
Free registration required • Instant access
DIN 1.7232 Heat Treatments
- Normalized at 840-870°C until the core reaches this temperature. Subsequently, they have to cool down in stationary atmosphere
Quenched at 820-850°C homogeneously and thoroughly to the quenching temperature
Tempered at 530-670°C
Surface hardened at 820-890°C by suitable gas burners or by eddy currents to this temperatures. Quenching is usually carried out in water. In order to reduce the risk of cracking, mildly acting quenchants can be used. If possible, immediately after surface hardening, a stress relief heat treatment shall be made at 140-180°C. The duration of stress relieving depends on the wall thickness. It should be at least 1 hour
DIN 1.7232 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN 1.7232 International Equivalent Materials
Showing 15 of 83 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 83 international equivalents?
See all 83 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 83Cross References
- 7Composition
- 4Mechanical Properties
- -Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 52Total Suppliers