ASTM F 2281 660 Stainless steels
Data updates
This material has 491 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASTM F 2281 660 Chemical Composition
F2281: 2004 / Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
Looking for full material performance data?
Free registration required • Instant access
ASTM F 2281 660 Physical Properties
Temperature
This material has 491 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASTM F 2281 660 Heat Treatments
- Condition AH1: solution treated at 982 to 1038°C (1800 to 1900°F), held for 1 h at heat, then cooled rapidly. Precipitation hardening (aging) shall be performed by heating to 704 to 760°C (1300 to 1400° F), holding for 12 to 16 h at heat then air cooled.
Condition AH2: solution treated at 899 to 954°C (1650 to 1750°F), held for 2 h at heat, then cooled rapidly.Precipitation hardening (aging) shall be performed by heating to 704 to 760°C (1300 to 1400°F), holding for 12 to 16 h at heat then air cooled.
Condition AH3: solution treated at 982 to 1038°C (1800 to 1900°F), held for 1 h at heat, then cooled rapidly.Precipitation hardening (aging) shall be performed by heating to 775 ± 14°C (1425 ± 25°F) holding for 16 h at heat then air cooled. Heated again to 650 ± 14°C (1200 ± 25°F) holding for 16 h at heat then air cooled.
ASTM F 2281 660 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASTM F 2281 660 International Equivalent Materials
Showing 15 of 277 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 277 international equivalents?
See all 277 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 277Cross References
- 13Composition
- 33Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 18Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 146Total Suppliers