ASME SA-541 Class 11C Structural and constructional steels
Data updates
This material has 54 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-541 Class 11C Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 1992
Looking for full material performance data?
Free registration required • Instant access
ASME SA-541 Class 11C Physical Properties
Temperature
This material has 54 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-541 Class 11C Heat Treatments
- After complete austenitization, the forgings shall be quenched in a suitable liquid medium by spraying or immersion. Quenching shall be followed by tempering at a subcritical temperature and holding at this temperature for a minimum time of 30 min/25 mm of maximum section thickness. Minimum tempering temperatures shall be 595°C (1100°F).
ASME SA-541 Class 11C Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME SA-541 Class 11C International Equivalent Materials
Showing 3 of 3 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 3 international equivalents?
See all 3 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 3Cross References
- 9Composition
- 5Mechanical Properties
- 36Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers