PROPRIETARY V416 Stainless steels
Data updates
This material has 304 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY V416 Chemical Composition
Villares Metals, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY V416 Physical Properties
Temperature
This material has 304 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY V416 Heat Treatments
- Forging: Heating to 1150 - 1200°C, keep at temperature until completely homogenized and forge carefully to avoid the occurrence of cracks. Do not forge below 900°C. Reheat if necessary. Cool slowly.
Annealing: For lower hardness, it should be heated to 840 - 900°C and cooled slowly in the oven. To improve machinability, annealing at around 700°C with air cooling is recommended.
Quenching: Heat slowly to 960-1000°C, keep at temperature for about half an hour and cool in oil. Large section pieces must be preheated to around 700°C and then brought to the tempering temperature. For small parts, cooling can be done with blown air.
Tempering: The tempering temperature is determined by the desired mechanical characteristics. The range between 420 and 600°C should be avoided, as tempering carried out between these temperatures tends to produce brittleness and a sharp drop in corrosion resistance.
PROPRIETARY V416 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY V416 International Equivalent Materials
Showing 15 of 177 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 177 international equivalents?
See all 177 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 177Cross References
- 4Composition
- 1Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 118Total Suppliers