PROPRIETARY X15TN Stainless steels
Data updates
This material has 184 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY X15TN Chemical Composition
Aubert & Duval, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY X15TN Physical Properties
Temperature
This material has 184 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY X15TN Heat Treatments
- Annealed condition: Heat to 840°C followed by slow cooling.
Quenched and tempered: Hardened at 1010°C, oil or gas quench. Temper at 180°C.
Quenched and double tempered: Hardened at 1010°C, oil or gas quench. Double temper at 500°C.
Quenched, sub-zero treated and tempered: Hardened at 1050°C, oil quench. Sub-zero treatment (-70/-80°C). Temper at 180°C.
Quenched, sub-zero treated and double tempered: Hardened at 1075°C, oil quench. Sub-zero treatment (-70/-80°C). Double temper at 500°C.
Harden: Heat to 1050/1075°C; Sub-zero treatment (-70/80°C) if required; Oil or gas pressure quench (> 3 bars).
Temper: According to hardness required.
Forging: 1200/1000°C. - Annealing: 840°C followed by slow cooling.
Quenching:
- preheating to 780°C,
- heating to 1050°C,
- quenching under gas pressure.
- Cold pass -76°C recommended.
- For parts with a large cross-section and simple geometry, oil quenching is recommended.
- Heating in an inert atmosphere is recommended.
Tempering : according to the desired hardness.
PROPRIETARY X15TN Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY X15TN International Equivalent Materials
Showing 11 of 52 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 52 international equivalents?
See all 52 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 52Cross References
- 16Composition
- 47Mechanical Properties
- 13Physical Properties
- 6Heat Treatment
- 2Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- 3Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 45Total Suppliers