PROPRIETARY UGI 4418 Stainless steels
Data updates
This material has 197 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UGI 4418 Chemical Composition
Ugitech SA, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY UGI 4418 Physical Properties
Temperature
This material has 197 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UGI 4418 Heat Treatments
- Forging: heating between 1150°C and 1180°C is recommended. Forging must preferably be carried out at a temperature of between 1180°C and 900°C, followed by air cooling;
Annealing: softening to about 600°C (do not exceed 625°C);
Quenching: oil quenching (or air quenching depending on the cross-sections) from 950°C to 1050°C;
Tempering: QT 900 = 590°C to 620°C for 2 x 4 hours or 1 x 8 hours minimum. Must be carried out as soon as possible after the quenching operation.
PROPRIETARY UGI 4418 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY UGI 4418 International Equivalent Materials
Showing 15 of 83 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 83 international equivalents?
See all 83 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 83Cross References
- 8Composition
- 16Mechanical Properties
- 12Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 75Total Suppliers