PROPRIETARY UGI 4121 Stainless steels
Data updates
This material has 62 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UGI 4121 Chemical Composition
Ugitech SA, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY UGI 4121 Physical Properties
Temperature
This material has 62 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UGI 4121 Heat Treatments
- Softening: soft annealing between 780°C and 830°C, slow cooling 30°C/h down to 600°C followed by air cooling. Softening annealing (subcritical): between 650°C and 760°C, followed by air cooling. Intermediate annealing during cold deformation: preferably between 650°C and 680°C, followed by air cooling.
Quenching: oil quenching between 980°C and 1050°C, fast air or gas quenching.
Tempering: temperature range from 100°C to 300°C.The temperature range between 400°C and 580°C must be avoided to prevent embrittlement and the associated reduction in corrosion resistance. Must be carried out as soon as possible after quenching. Temperature must rise slowly to avoid any distortion and cracking of sophisticated geometry parts.
PROPRIETARY UGI 4121 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY UGI 4121 International Equivalent Materials
Showing 4 of 5 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 5 international equivalents?
See all 5 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 5Cross References
- 8Composition
- 28Mechanical Properties
- 9Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 7Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 4Total Suppliers