PROPRIETARY UGIMA 4104 Stainless steels
Data updates
This material has 231 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UGIMA 4104 Chemical Composition
Ugitech SA, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY UGIMA 4104 Physical Properties
Temperature
This material has 231 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UGIMA 4104 Heat Treatments
- Forging: Heating between 1100°C and 1250°C; minimum forging temperature: 950°C; After forging: two-phase ferrite + martensite structure, to be softened, if required.
It can be softened to a ferritic structure at about 780-820°C (minimum 2 hours).
It can be hardened to a ferrite + martensite structure between 900°C and 1070°C. +QT650 tempered steel is hardened between 950°C and 1070°C and tempered between 550°C and 650°C.
Has a soft ferritic structure after being treated up to approx. 830°C. Above this temperature, it forms austenite, which is transformed into martensite by cooling: approximately 50% martensite maximum after treatment to about 1100°C.
PROPRIETARY UGIMA 4104 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY UGIMA 4104 International Equivalent Materials
Showing 15 of 115 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 115 international equivalents?
See all 115 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 115Cross References
- 8Composition
- 8Mechanical Properties
- 17Physical Properties
- 1Heat Treatment
- -Metallography
- 1Machinability
- 2Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 79Total Suppliers