PROPRIETARY SOLEIL B3 Stainless steels
Data updates
This material has 216 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SOLEIL B3 Chemical Composition
Arcelor Mittal, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY SOLEIL B3 Physical Properties
Temperature
This material has 216 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SOLEIL B3 Heat Treatments
- Solution annealing 750 - 800°C, followed by air cooling. Hot forming is typically performed in the 1100 - 700°C temperature range followed by air cooling.
- Solution annealing at 750 - 800°C (1382 - 1472°F), followed by air cooling.
Hot forming: typically performed in the 1100 - 700°C (2012 - 1292°F) temperature range followed by air cooling. Limit the holding time at high temperature and finish between 800°C (1472°F) and 700°C (1292°F) in order to refine grains.
Cold forming: can be followed by a stress relieving operation at 700 - 800°C (1292 - 1472°F), air cooling.
Decontamination - passivation: nitric bath at 10/20% (in volume). 20°C (68°F). Water rinsing.
PROPRIETARY SOLEIL B3 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY SOLEIL B3 International Equivalent Materials
Showing 15 of 78 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 78 international equivalents?
See all 78 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 78Cross References
- 16Composition
- 32Mechanical Properties
- 21Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 10Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 55Total Suppliers