PROPRIETARY 16MnCr5 Structural and constructional steels
Data updates
This material has 535 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 16MnCr5 Chemical Composition
Salzgitter Flachstahl, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY 16MnCr5 Physical Properties
Temperature
This material has 535 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 16MnCr5 Heat Treatments
- Hot-forming at 1150 to 850°C.
Normalizing at 880°C, air.
Core hardening at 860 to 900°C, oil, polymer, salt bath.
Carbonitriding at 750 to 930°C, gas.
Carburizing at 880 to 980°C.
Hardening carburizing surf. at 810 to 840°C, oil, polymer, salt bath (160-250°C).
Str.reliev (+SR) at 150 to 200°C.
Soft annealing (+A) at 650 to 700°C, frunace cooling.
Isothermal annealing (+I) at 870°C, furnace cooling to 650°C, tha air.
Spheroidizing (+AC) at 730 to 750°C furnace cooling 50°C/h to 680°C, pause cooling to 400°C than air.
End quench hardenability at 870°C, water.
Pre-heating welding (welding must be carried out on the annealed state and before carburizing) at 150 to 350°C.
Stress-relieving after welding at 600°C furnace cooling.
Transformation annealing (+FP) at 950 to 1000°C, quick cooling to 630 to 650°C, stop acc. to thickness of the material, then air.
Mechanical properties at different tempering temperatures obtained after quenching at 870°C in oil. - Water quenching: 820-900°C; Oil quenching: 830-900°C.
PROPRIETARY 16MnCr5 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY 16MnCr5 International Equivalent Materials
Showing 15 of 257 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 257 international equivalents?
See all 257 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 257Cross References
- 32Composition
- 123Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 118Total Suppliers