PROPRIETARY Sandvik SAF 2507 Stainless steels

Material group: Ferrous Alloys / Stainless steels
Country / Standard: PROPRIETARY
Indicative price:

Data updates

Latest Update: 2019-06
Total number of updates: 3
Update History
2015-06 2014-04

This material has 1193 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Sandvik SAF 2507 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
≤ 0.030
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
25
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
≤ 0.5
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
N
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7727-37-9; 17778-88-0
CRITERIA
Ni
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-02-0
CRITERIA
P
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3

Sandvik Materials Technology, Product Data Sheets,

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Sandvik SAF 2507 Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
180 — 215 GPa
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
val1
Full data available with free access View Complete Material Data
Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Heat Capacity
val1
Full data available with free access View Complete Material Data
J/(kg∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
val1
Full data available with free access View Complete Material Data
W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

This material has 1193 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Sandvik SAF 2507 Heat Treatments

  • The tubes are normally delivered in heat treated condition. In addition solution annealing at 1050-1125°C (1920-2060°F), rapid cooling in air or water, is recommended.
    Bars and hollow bars are normally delivered in solution annealed and quenched condition. If further hot working is needed, solution annealing with slow heating up to 1000°C (1830°F). Annealing at 1050-1125°C (1920-2060°F), followed by quenching, is recommended. For hollow bars stress relief heat treatment at 350°C (660°F) for 5h followed by air cooling is used.
    Billets are supplied in the hot worked condition. For finished products, the following heat treatment is recommended: Solution annealing with slow heating up to 1000°C (1830°F). Annealing at 1050-1120°C (1920-2050°F), followed by quenching in water. Stress relief heat treatment at 350°C (660°F) for 5h followed by air cooling.
    Billets hot working should be carried out at a material temperature of 1000-1200°C (1830-2190°F). Heating should be slow up to 1000°C (1830°F). If the temperature falls below 1000°C (1830°F) during hot working, there is a risk of sigma phase formation and the material must, therefore, be reheated.
    Strips are solution annealing at 1050-1125°C (1920-2060°F) for 1-5 minutes, followed by rapid cooling in air or water. Aging at 480°C (900°F) for 3 h.

PROPRIETARY Sandvik SAF 2507 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
750 — 1850 MPa
Unlock full details
Full data available with free access View Complete Material Data
Brinell Hardness (HB)
≤ 260
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
≥ 3 %
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data
Impact Energy
val1
Full data available with free access View Complete Material Data
J
Unlock full details
Full data available with free access View Complete Material Data
Rockwell Hardness (HR)
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp1
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

PROPRIETARY Sandvik SAF 2507 International Equivalent Materials

Showing 15 of 145 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
SAF2507
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
Z 3 CND 25-06 Az
STANDARD
AFNOR NF
COUNTRY / PRODUCER
France
EQUIVALENCE CATEGORY
Implicit
MATERIAL
SA-479 S32750
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
SA-789 S32750
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 182 F 316LN
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 182 F 52
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 182 F 53
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 270 2507
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 789 S32750
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 928 Type 2507
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 240 S32750
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 988 S32750
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 959 Type 2507
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
S39275
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit
MATERIAL
A 790 S32750
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Implicit

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 145 international equivalents?

See all 145 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 145Cross References
  • 10Composition
  • 56Mechanical Properties
  • 49Physical Properties
  • 5Heat Treatment
  • 3Metallography
  • -Machinability
  • 12Stress-Strain
  • 1Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • 4Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • 837Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 71Total Suppliers